N9041B-RT2 Datasheet, PDF (15/29 Pages) Keysight Technologies – UXA X-Series Signal Analyzer, Multi-touch

15 | Keysight | N9041B UXA X-Series Signal Analyzer, Multi-touch - Data Sheet
Inputs and Outputs
Front Panel
RF input connector
Standard (for Input 1)
Standard (for Input 2)
Probe power
Voltage/current
USB ports
Master (3 ports)
Standard
Connector
Output current
Headphone jack
External mixing
Connection port
Connector
Impedance
Functions
Mixer bias range
IF center frequency
≤ 25 MHz IF path
40 MHz BW IF path
255 MHz BW IF path
1 GHz BW IF path
LO output frequency range
Rear Panel
10 MHz out
Connector
Output amplitude
Frequency
Ext Ref In
Connector
Input amplitude range
Input frequency
Frequency lock range
Trigger 1 and 2 inputs
Connector
Impedance
Trigger level range
Trigger 1 and 2 outputs
Connector
Impedance
Level
Sync (reserved for future use)
Connector
Monitor output 1
Connector
Format
Resolution
Monitor output 2
Connector
Resolution
2.4 mm male, 50 Ω nominal
1.0 mm male ruggedized, 50 Ω nominal
+15 Vdc, ± 7% at 150 mA max nominal
–12.6 Vdc, ± 10% at 150 mA max nominal
Compatible with USB 2.0
USB Type-A female
0.5 A nominal
Miniature stereo audio jack (3.5 mm, also known as “1/8 inch”)
SMA, female
50 Ω nominal
Triplexed for mixer bias, IF input and LO output
± 10 mA in 10 uA step
322.5 MHz
250.0 MHz
750.0 MHz
750.0 MHz
3.75 to 14.1 GHz
BNC female, 50 Ω nominal
≥ 0 dBm nominal
10 MHz + (10 MHz x frequency reference accuracy)
BNC female, 50 Ω nominal
–5 to 10 dBm nominal
1 to 50 MHz nominal (selectable to 1 Hz resolution)
± 2 x 10^–6 of specified external reference input frequency
BNC female
> 10 kΩ nominal
–5 to +5 V (TTL) factory preset
BNC female
50 Ω nominal
0 to 5 V (CMOS) nominal
BNC female
VGA compatible, 15-pin mini D-SUB
XGA (60 Hz vertical sync rates, non-interlaced) Analog RGB
1280 x 800
Mini DisplayPort
1280 x 800