|
N5247A Datasheet, PDF (54/78 Pages) Keysight Technologies – Keysight 2-Port and 4-Port PNA-X Network Analyzer | |||
|
◁ |
General Information
ï§ Miscellaneous Information
ï§ Front Panel
ï§ Rear Panel
ï§ Environment and Dimensions
Table 31. Miscellaneous Information
Description
System IF Bandwidth Range
CPU
LXI
Supplemental Information
1 Hz to 15 MHz (7 MHz, 10 MHz, and 15 MHz IFBWs are available ONLY with FW A.09.42 and
later, and with DSP version 5)
Intel 2.0 GHz Core i7.
Some instruments may have a different CPU.
For the latest information on CPUs and associated hard drives, visit:
http://na.support.keysight.com/pna/hdnumbers.html
Class C
Table 32. Front Panel Information, All Options
Description
RF Connectors
Test Ports
Jumpers
Typical Performance
1.85 mm (male), 50 ohm (nominal), 0.002 in. Center Pin Recession (characteristic)
1.85 mm (female) connectors with 1.85 mm (male) jumper cables
USB 2.0 Ports - Master (4 ports)
Standard
Compatible with USB 2.0
Connector
USB Type-A female
Display
Size
26.3 cm (10.4 in) diagonal color active matrix LCD; 1024 (horizontal) X 768 (vertical) resolution
Refresh Rate
Pixels
Vertical 60 Hz; Horizontal 46.08 kHz
Any of the following would cause a display to be considered faulty:
⢠A complete row or column consists of âstuckâ or âdarkâ pixels.
⢠More than six âstuck onâ pixels (but not more than three green) or more than 0.002% of the
total pixels are within the LCD specifications.
⢠More than twelve âdarkâ pixels (but no more than seven of the same color) or more than
0.004% of the total pixels are within the LCD specifications.
⢠Two or more consecutive "stuck on" pixels or three or more consecutive "dark" pixel (but no
more than one set of two consecutive dark pixels)
⢠âStuck onâ âdarkâ pixels are less than 6.5 mm apart (excluding consecutive pixels)
54
|
▷ |