N5247A Datasheet, PDF (21/78 Pages) Keysight Technologies – Keysight 2-Port and 4-Port PNA-X Network Analyzer

Uncorrected System Performance
Specifications apply to following conditions:
 Over environmental temperature of 25 °C ±5 °C, with less than 1°C variation from the calibration temperature.
 Cable loss not included in Transmission Tracking.
 Crosstalk measurement conditions: normalized to a thru, measured with shorts on all ports, 10 Hz IF bandwidth,
averaging factor of 8, alternate mode, source power set to the specified maximum power.
 With option 029, port 1 impedance tuner switch is in bypass position and port 2 noise receiver switch is in normal
position unless specified.
Table 6a. Uncorrected System Performance (dB), All Options, All Ports - Specification
Description
Directivity
Source Match
10 MHz to 50 MHz
17
7
50 MHz to 500 MHz
24
15
500 MHz to 2 GHz
24
10
2 GHz to 3.2 GHz
20
10
3.2 GHz to 10 GHz
20
7
10 GHz to 16 GHz
16
7
16 GHz to 20 GHz
16
7
20 GHz to 26.5 GHz
14
7
26.5 GHz to 50 GHz
13
7
50 GHz to 60 GHz
13
7
60 GHz to 67 GHz
10
6
1 _{Port 1 and 2 load matches with Option 029 are degraded by 1 dB.}
Load Match
6¹
11
7
7
7¹
6
7¹
7¹
6
7¹
6
21