W2302EP Datasheet, PDF (5/26 Pages) Keysight Technologies – Quick Start for Signal Integrity

Modify the Schematic and Re-Simulate
The eye diagrams from EyeDiff_Probe1 before and after
Rx are nearly identical because the receiver equalization is
turned off.
–– Back in the schematic; double click on the Rx_Diff
component to open its dialog box.
TIP:
Help is just a click away. The Help > Topics and Index
menu pick shows that there is also a one-click hot key for
opening the built-in ADS documentation. Just press the F1
function key at any time to open the documentation and
use the Search tab to find specific topics.
–– Enable the Feed-Forward Equalizer (FFE)
–– The Help > Getting Started with ADS… brings up the
opening ADS splash screen with links to Technical
Support and the on-line Knowledge Center with the
latest in ADS documentation updates and application
examples.
–– Be sure to Register on Knowledge Center to gain
full access to Keysight Technologies, Inc. world class
technical support.
–– Click OK to close the dialog box and save the changes.
–– Click the Simulate icon .
–– After completion, the data display window updates.
Note the improvement in the post-receiver eye height
and width.
5