W2302EP Datasheet, PDF (17/26 Pages) Keysight Technologies – Quick Start for Signal Integrity

Add Eye Probe and Simulation Controller
–– Select the EyeDiff_Probe from the same palette and
connect it to the differential output pins.
–– Place a Channel Simulation Controller (ChannelSim) on
the schematic page.
–– Click on the Simulate icon
data display window opens.
in the tool bar. A new
–– Save the data display as pcie.dds.
–– Place a rectangular plot and add the Density trace
from the default pcie data set.
–– Place a List and add Summary measurements.
–– Select the Plot Options tab.
–– Select Format ► Engineering.
–– Click OK.
–– Set the ChannelSim1 parameter NumberOfBits to 50000.
17