DDR4-FUNCTIONAL Datasheet, PDF (5/10 Pages) Keysight Technologies – DDR4 Functional/Protocol Debug and Analysis Reference Solution

05 | Keysight | DDR4 Functional/Protocol Debug and Analysis Reference Solution - Solution Brochure
Hardware – Probing
DDR4 DIMM and SODIMM interposers are available through Keysight.
Contact your Keysight representative to order the interposer for your
system under test. Visit: www.keysight.com/find/contactus.
FS2510AB DDR4 DIMM and FS2512 DDR4 SODIMM interposers offer:
–– Ease of connection
–– Direct connect to U4164A
–– Low profile - Minimal loading
–– Support of UDIMM or RDIMM
–– Timing and state analysis
–– Compatible with DDR setup assistant and DDR eye scan
W4640 Series BGA probes
www.keysight.com/find/w4641a
www.keysight.com/find/w4643a
The W4640A series DDR4 BGA interposers enable probing of embedded
memory DRAM from the ball grid array with Keysight logic analyzers.
The W4640A Series DDR4 BGA interposers are designed to take full
advantage of quad sample state mode on U4164A modules with U4164A-
02G option, requiring only a single probe point for up to four samples at
two different thresholds.
U4208/09A probe/cable, 61-pin ZIF, 160-pin direct connect
www.keysight.com/find/u4208a
The U4208A/09A probe/cables have a 61-pin ZIF probe connector on one
end of the cable and two 160-pin connectors that connect into the front
panel of a U4164A logic analyzer module on the other end of the cable.
The U4208A/09A are designed to connect from the left/right wings of
the W4640A Series DDR4 BGA interposer directly into the U4164A logic
analyzer. The U4164A logic analyzer will be in normal state mode for the
address and command signal capture and in quad sample state mode for
the data signal capture. Default configurations for the W4640A Series
DDR4 BGA interposers and U4208A/09A probe/cables are included at
no charge in the standard download package of the B4661A memory
analysis software.
For a more complete set of probing options, please refer to the
DDR4 Functional/Protocol Debug and Analysis Reference Solution
Configuration Guide, literature number 5992-1539EN and the Keysight
Technologies Probing Solutions for Logic Analyzers Data Sheet, literature
number 5968-4632E.