Z2090B Datasheet, PDF (4/7 Pages) Keysight Technologies – Modulation Domain and Time Interval Analyzers Pulse Analyzer System (PAS)

Add the 4-channel digitizer
for up to 8 GS/sec sampling
with 10-bit resolution
The digitizer option includes a
4-channel digitizer with 2 of the chan-
nels available as direct inputs and
2 channels connected through the IRM
in parallel to the TDC for simultaneous
operation in both measurement modes.
Capture and store digitized samples (to
a file) for off-line analysis or for direct
control via the 89601A VSA software.
This enables measurements such as:
– Detected pulse envelope vs time
– Pulse power measurements
– Measure RF power (peak and average) of
an input pulsed RF signal
Add VSA software for
extensive demodulation
and analysis capability
With the Keysight 89601A VSA
software, the PAS has extensive signal
demodulation and analysis capability
for a wide variety of RADAR signal
and modulation types. This unique
combination of extreme efficiency,
accuracy, speed, and signal analysis
capability make the Keysight PAS ideal
for your modern RADAR system testing
needs. Make additional measurements
such as:
– Pulse carrier frequency measurements
– Pulse amplitude and power vs time (peak,
average, overshoot)
– Modulation on pulse measurements (FM
chirp, barker, Doppler, etc.)
Figure 4. Barker coded pulsed RF showing frequency, delay, phase, time (log), time (linear), and I/Q
Figure 5. Pulsed RF linear chirp with spectrogram and frequency spectrum
4