U4431A Datasheet, PDF (4/10 Pages) Keysight Technologies – MIPI M-PHY Protocol Analyzer

04 | Keysight | U4431A MIPI M-PHY Protocol Analyzer - Data Sheet
Accelerate M-PHY Products with Deep Insight Across your Entire Design (Continued)
Isolate events with protocol-
aware triggers.
Simple drag-and-drop trigger macros
can be quickly customized by clicking on
the blue hyperlink. Or choose advanced
if-then-else triggers to branch in any
direction to up to 8 different conditions,
and add a variety of qualifying conditions.
Trigger on packet types, PHY and stack
errors, payload data (up to 32 bytes),
flags, counters, and time delays. You can
also specify speed, transmission type, and
link state.
Probing that leverages
Keysight’s high-speed
oscilloscope and high-speed
logic analysis technologies.
The U4433A high-Z MIPI M-PHY
differential probe connects to Keysight’s
12 GHz ZIF tips to ensure a flexible,
yet non-intrusive connection. U4433A
is the recommended probe for most
applications.
The U4432A is an impedance-matched
SMA probe for use with the packet
generator option (613). It is not intended
for mid-bus probing.
However, the N4230A breakout board can
be used to give U4432A the impedance
characteristics of the U4433A flying
probe. As a result, you can connect
your host and device boards with SMA
cables, and they do not require a solder-in
connection. Please refer to the U4431A
Hardware and Probing guide (publication
number U4431-97001) for proper use and
topography.
U4432A SMA probe
U4433A differential probe
N4230A SMA breakout board for U4432A