N1012A Datasheet, PDF (4/11 Pages) Keysight Technologies – N1012A OIF CEI 3.1 Compliance

4 | Keysight | N1012A OIF CEI 3.0 Compliance and Debug Application for 86100D DCA-X Oscilloscopes – Data Sheet
Debug and Verify Your Designs Quickly and Easily
Choose Your Hardware
Configure your oscilloscope for a single
module (on the right) or multi-module
(listed in ordering guide). Connect your
device through the recommended phase
trimmers and you now have access to
measurements with intrinsic jitter as low
as 45 fs. Also have the PNA available for
return loss and differential to common
mode measurements.
Configure Your Measurements
Customize parameters that are specific
to your set-up such as baud rate and
attenuation. Use default values or enter
your own for settings such as number of
samples or patterns taken and peaking for
CTLE. Choose Normal mode to test within
compliance limits and choose Debug mode
to test to your custom limits.
Select Any OIF CEI Interface
The N1012A OIF CEI Compliance Applica-
tion covers all nine OIF CEI 3.1 interfaces,
which include rates from 4.9 Gb/s to 28.1
Gb/s. Click on the desired interface and
the appropriate tests are offered in Select
Tests.