N1012A Datasheet, PDF (10/11 Pages) Keysight Technologies – N1012A OIF CEI 3.1 Compliance

10 | Keysight | N1012A OIF CEI 3.0 Compliance and Debug Application for 86100D DCA-X Oscilloscopes – Data Sheet
Choose Industry-Leading Solutions
Keysight offers a wide range of electrical and optical test solutions to address current and emerging communications standards.
For OIF CEI 3.1, you may choose a solution that covers only the lower data rates or choose a solution that covers all rates; these are
separated into columns in the table below. Each row shows the recommended configuration of hardware and software to measure the
many parameters. The multi-module approach is useful for designers that would like to measure multiple lanes or may already own a
mainframe or module.
Oscilloscope mainframe
Single plug-in module
Multi-module
Software
Matched cable set (1)
Phase trimmers (2)
DC blocks (2)
Pick-offs (2)
Performance network analyzer
Impedance analysis
CEI 6G-LR/SR
CEI 11G-LR/MR/SR
CEI 6G-LR/SR
CEI 11G-LR/MR/SR
CEI 25G-LR
CEI 28G-SR/VSR
86100D DCA-X
86100D-ETR Extended trigger
86100D-200 Enhanced jitter analysis
86100D-201 Advanced waveform analysis
86108A
86108B LBW/232
86108B HBW / 232
86112A, N1045A, N1055A, or 54754A
86107A, any option
N4877A-216
N1045A, N1055A, 86117A, or 86118A-H01
86107A, any option
N4877A-232
FlexDCA software, A.02.52, or later
N1012A
86100DU-400 for Jitter Transfer
86100DU-401 for PRBS31
Keysight I/O Libraries, 16.3 or higher
86108B-CA3
86108B-CA2
86108B-PT3
86108B-PT2
86108B-DC3
86108B-DC2
N4915A-015
N4915A-015
N5230C 140/145, N5241A or other 4-port
PNA’s greater than 13 GHz
PLTS Studio N1930B
N5224A, N5244A or other 4-port PNA’s
greater than 32 GHz
PLTS Studio N1930B
For VSR: 4294A or E5061B
Keysight Technologies Oscilloscopes
Multiple form factors from 20 MHz to > 90 GHz | Industry leading specs | Powerful applications