U1882B Datasheet, PDF (3/11 Pages) Keysight Technologies – Measurement Application for InfiniiVision

03 | Keysight | U1881A and U1882B Measurement Application for InfiniiVision and Infiniium Oscilloscopes - Data Sheet
Full-featured measurements and automatic reporting of
switching mode power supply (SMPS) characteristics
Now you can skip the time‑consuming manual measurements
when you are characterizing your power devices. The U1881A
and U1882A power measurement application for Keysight
Technologies, Inc. oscilloscopes provide a full suite of power
measurements that run directly on an Infiniium S-Series and
9000 Series oscilloscope or on a separate PC for use with
InfiniiVision X-Series oscilloscopes (except 2000 X-Series).
Keysight’s power measurement application offers seven
modules to help you characterize your devices (power
device analysis, input line analysis, output analysis, turn on/off
analysis, transient analysis, modulation analysis) in addition to
deskew and report generation. Each module contains relevant
measurement and setup selections for easy repeatability.
Modules
Deskew
Power device analysis
Input line analysis
Inrush current analysis
Output analysis
Turn on/off analysis
Transient analysis
Modulation analysis
Report generation
Measurements
Automatic deskew for voltage and current probes
Switching loss
Safe operating area (SOA) with SOA mask editing
Dynamic ON resistance
dI/dt
dV/dt
Power factor (real power/apparent power)
Real power
Apparent power
Reactive power
Crest factor
Precompliance test to IEC61000-3-2 std A, B, C, D and RTCA DO-160E
Inrush current
Output voltage ripple
Turn on time
Turn off time
Transient load response
Pulse width versus time plot
Duty cycle versus time plot
Period versus time plot
Frequency versus time plot
Report generation