English
Language : 

E6567E Datasheet, PDF (3/4 Pages) Keysight Technologies – cdma2000/1xEV-DO/LTE/LTE-A Wireless Test Manager
03 | Keysight | E6567F cdma2000/1xEV-DO/LTE/LTE-A Wireless Test Manager - Technical Overview
1xEV-DO transmitter test
(Applies to Release 0, A, and B)
–– Waveform quality
–– Code domain accuracy
–– Transmitter spurious emissions
–– Data, RRI, DRC, and ACK channel output power
–– Maximum output power
–– Access probe open loop power
–– Minimum controlled output power
–– Closed loop power control
–– Time response for open loop power control
1xEV-DO receiver tests
(Applies to Release 0, A, and B)
–– Traffic channel PER with AWGN
–– Receiver sensitivity and dynamic range
General tests
–– Current drain
–– Start loop
–– End loop
–– Send/Receive GPIB command
–– Data analyzer
–– Send/Receive DUT command
–– Keysight 14565B device characterization software control
Hardware Supported
Test instruments
–– E7515A UXM wireless communications test set
–– E7530A LTE test application and E7630A LTE lab application
–– Keysight 8960 Series 10 wireless communications test set
–– E5515E or E5515C mainframe (or equivalent E5515B/T)
with Option 003
–– E1962B cdma2000®/IS-95/AMPS mobile test application
(revision B.15.18 or later)
–– E1966A 1xEV-DO test application (revision A.10.18 or
later)
–– E1987A GSM/GPRS/EGPRS, AMPS/136, cdma2000,
1xEV-DO, W-CDMA fast switching mobile test application
(revision A.09.21 or later)
–– Keysight 66311B, 66319B, and 66321B power supplies
–– Keysight 34970A with 34901A, 34903A, and 34907A data
acquisition/switch unit
Fixtures
Tescom TC-5941, TC-5942, and TC-5952B
Adapters
–– Keysight 82357A USB/GPIB interface
–– National Instruments GPIB-USB-A external controller
PC cards
–– Keysight GPIB
–– National Instruments GPIB
–– Advantech PCI 1750 E6567F-1TP
–– Control RocketPort 95870-3 and 99096-3 multi-port
serial card
Peripherals
–– Symbol LS-1220-1200A fixed bar code reader
–– Symbol LS-3603MX-1200A, P300FZY, and LS40041-I100
handheld bar code reader
–– HP printers
–– Epson TM-U200D and TM-U200D strip printer
PC requirements
–– Operating system: Microsoft Windows 7 Professional and
Enterprise
–– Microsoft Visual Studio.NET
–– Microsoft Internet Explorer Version 6.0 or later
–– 600 MHz Pentium III or higher (1 GHz Pentium III or higher for
extended capability)
–– 512 MB RAM minimum (1024 MB is recommended for normal
development and is required for extended capability operation)
–– 200 MB free hard drive space
–– CD-ROM
–– GPIB card or converter with VISA drives (one per test system)
–– LAN port for remote control of UXM
–– Serial ports for fixtures, device control, and bar code reader
Order Information
–– E6567F cdma2000/1xEV-DO/LTE/LTE-A Wireless Test Manager
–– E6567F-1TP transportable perpetual license, development, and
run time version for E6567F
–– E6569F Wireless Test Manager suite, including E6567F and
E6568F
–– E6569F-1TP transportable perpetual license, development, and
run time version for E6567F and E6568F
–– E6571F Wireless Test Manager run-time license
–– E6571F-1TP transportable perpetual license, run time only ver-
sion for both E6567F and E6568F
–– E6567FU upgrade existing E6567x to E6567F
–– E6567FU-1TP transportable perpetual license, development, and
run time version for E6567x upgrade to E6567F
–– E6571FU upgrade existing E6571x to E6571F
–– E6571FU-1TP transportable perpetual license, run time only
version for upgrade E6567x and E6568X to E6567F and E6568F
respectively