5992-1614EN Datasheet, PDF (3/5 Pages) Keysight Technologies – Propsim F32 Channel Emulator 6 GHz

03 | Keysight | Propsim F32 Channel Emulator 6 GHz - Data Sheet
Specifications
RF interface channel configurations
MIMO emulation
MANET, V2X, Device to Device link emulation
RF interface channel frequency range
RF interface channel signal bandwidth
Number of fading paths per channel
Number of fading channels
Internal interference generators
Excess delay range for terrestrial channel emulation
Number of integrated RF local oscillators
Multi-emulator synchronization
8, 16, 24 or 32
2x2, 4x2, 4x4, 8x2, 8x4,
8x8, 10x10, 16x8 up to 64x8*
up to 32 radios in chain, and 11 radios in full mesh network topology
up to 350 - 6000 MHz
40 MHz/32 RF channels, optionally 80 MHz /16 RF channels
up to 48
up to 128 all independently controllable via GUI for fading, Doppler,
path amplitude and path phase offset
LTE fully configurable and synchronous. AWGN and CW
up to 3000 μs
up to 8 internal and 8 external carrier frequencies. In total
up to 16
up to 6 units
Input power measurement
Automatic input level setting
Input power meter modes
Continuous and RF burst-triggering
Integrated duplex components for uplink and downlink separation
User-defined active connector settings
ATE control interface for effortless test case automation
Integrated phase and amplitude calibration (no need for VNA)
Fully automatic phase and amplitude calibration with Keysight Technologies ACU external hardware unit (no need for VNA)
RF Performance
RF input level range
RF output level range
Peak output level
RF output level setting resolution
Digital fading channel dynamics
Noise floor
EVM
350...4200MHz -50dBm...+25dBm RMS
4200...6000MHz -40dBm...+25Bm RMS
350...4200MHz -4dBm...-120dBm RMS
4200...6000MHz -14dBm...-120dBm RMS
max. +16dBm 350...4200MHz
max. +6dBm 4200...6000MHz
0.1 dB
60 dB
– 165 dBm/Hz typical (output RMS level < –40 dBm)
OFDMA 20 MHz BW < –45 dB typical
1.  multi-F32 unit configuration