5992-1614EN Datasheet, PDF (2/5 Pages) Keysight Technologies – Propsim F32 Channel Emulator 6 GHz

02 | Keysight | Propsim F32 Channel Emulator 6 GHz - Data Sheet
Perform advanced testing of chipsets, devices and
base stations with Propsim F32
–– LTE-A multi-mode chipset, device and base station testing
–– CTIA/3GPP/CCSA MIMO OTA device testing in anechoic
chamber
–– Multi-RAT Virtual Drive Testing
–– Device and base station testing part of mobile operator test
plan
–– Applications end-to-end performance testing with live
network:
VoLTE, Data Throughput. Fall back scenarios to legacy
technology Voice and Data. Cell selection/re-selection
scenarios etc.
–– LTE 3D MIMO technology testing
–– WLAN, V2X and device to device testing
Unique capabilities for LTE-Advanced
Performance Testing
–– Unique multi-link emulation capability and integrated
programmable LTE interference sources
–– 32 bi- and uni-directional RF interface channels and 128
internal channels for flexible multi-link scenario testing
–– MU-MIMO testing e.g. 10x UE and 2x eNB / 4x UE and 4 x eNB
–– LTE small cells and dual connectivity testing. LTE-Hi, LTE-
LAA and WiFi offloading
–– Multi-RAT live network and device testing e.g. multi-cell LTE,
HSPA, GSM
–– Single F32 supports LTE Carrier Aggregation testing up to
8CC bands, each 40MHz wide
–– Uplink MIMO, LTE 3D beamform testing e.g. 16x8-Bi or up to
64x4-Bi
–– Efficient device MIMO OTA testing with Propsim FAST-OTA
capability
Improve testing accuracy and coverage
–– Propsim Geometric Channel Modeling tool (GCM) enables
easy multi-link test scenario definition based on SCME,
WINNER models to test MU-MIMO, beamforming, smart
antennas, CoMP, carrier aggregation, HetNet and multi-RAT
performance and interoperability testing of real devices and
live base stations
–– Propsim Virtual Drive Testing modeling tool enables
advanced troubleshooting of field issues, benchmarking,
interoperability and regression testing by importing field
measurement data from a live network captured by drive test
tools such as Nemo Outdoor and Nemo Handy
–– Propsim MIMO OTA modeling tools compatible with
CTIA/3GPP/CCSA test plans (and beyond) enable easy
benchmarking of off-the-self devices in anechoic chamber
installations
–– Propsim WLAN modeling tool for design and verification of
MIMO performance and interoperability of WLAN products
Ready test scenario packs include:
–– Operator performance test plans, minimizing time spent on
test preparation
–– High-speed train, CoMP, MU-MIMO & beamforming testing
adopted in test plan by major mobile network operator in
Asia
–– CTIA MIMO OTA test scenarios
–– Propsim FAST-OTA capability enables up to 12x faster device
MIMO OTA testing compared to conventional test methods
–– LTE carrier aggregation testing, MIMO OTA and RF
conductive
–– Mobile Adhoc Network and MESH network radio testing
–– Automotive 802.11p V2X radio testing
Easy access to main functionality
–– Setup Wizard with guided steps for test scenario creation
and editing
–– Bi- and uni- directional operation of RF ports
–– Built-in input power measurement
–– Integrated synchronous LTE Network interference generation
–– Fully automated phase and amplitude calibration without
external VNA
–– Automated 24/7 testing
–– ATE remote control interface for GPIB and LAN
–– Compatible with other Propsim products test automation
interface enabling smooth and convenient transfer or share
of test automation scripts