N9916A Datasheet, PDF (29/48 Pages) Keysight Technologies – FieldFox Handheld Analyzers

29 | Keysight | FieldFox Handheld Analyzers 4/6.5/9/14/18/26.5/32/44/50 GHz - Data Sheet
Tracking Generator or Independent Source
The performance listed in this section applies to the tracking generator and independent source capabilities available in the following
models:
–– FieldFox RF & microwave analyzers: N9913A, N9914A, N9915A, N9916A, N9917A, N9918A
N9950A, N9951A, N9952A
–– FieldFox microwave spectrum analyzers: N 9935A, N9936A, N9937A, N9938A
N9960A, N9961A, N9962A
See FieldFox Configuration Guide for option information. Many capabilities listed in this Data Sheet require options.
Note: Traditional tracking generators track the receiver frequency only. In FieldFox analyzers, the tracking generator frequency can be
set to either track the receiver frequency, or act as an independent CW source.
Models
Tracking generator or independent source frequency range
N991xA, N993xA
N9913A
30 kHz to 4 GHz
N9914A
30 kHz to 6.5 GHz
N9915A, N9935A
30 kHz to 9 GHz
N9916A, N9936A
30 kHz to 14 GHz
N9917A, N9937A
30 kHz to 18 GHz
N9918A, N9938A
30 kHz to 26.5 GHz
N995xA, N996xA
N9950A, N9960A
300 kHz to 32 GHz
N9951A, N9961A
300 kHz to 44 GHz
N9952A, N9962A
300 kHz to 50 GHz
Power step size
Power settable in 1 dB steps across power range
Functions
Mode
Continuous wave (CW), CW coupled, tracking (swept frequency)
Operations
Normalization, frequency offset, spectral reversal
RF output VSWR
Nominal
10 MHz to 2.7 GHz
1.7 : 1
> 2.7 to 7.5 GHz
1.5 : 1
> 7.5 GHz
2.2 : 1