34461A Datasheet, PDF (22/23 Pages) Keysight Technologies – Digital Multimeters

22 | Keysight | Digital Multimeters: 34460/61/65/70A - Data Sheet
Options, Upgrades & Accessories
Options & upgrades
Option
(at purchase)
GPB
SEC
LAN
ACC
DIG
MEM
Z54
Upgrades
(post purchase)
3446GPBU
3446SECU
3446LANU
3446ACCU
3446DIGU
3446MEMU
N/A
Applicable
models
All
All
34460A
34460A
34465/70A
34465/70A
All
Description
Add GPIB interface, user-installable
Enable NISPOM and file security
Enable LAN interface and external triggering
Add 34138A accessory kit, includes test leads, USB cable
Enable high-speed digitizing and advanced triggering
Enable 2 million readings memory
Certificate of calibration: ANSI/NCSL Z540.3-2006
Upgrade process
Customer installable hardware
Software license
Software license
Accessory kit
Software license
Software license
Calibration certificate
Accessories
Accessories included
34460A:
Power cord
Calibration certificate
34461A,
34465A,
34470A:
34138A test lead set with probes, fine tip probes,
SMT grabbers and mini grabber attachments
Power cord
IO Libraries CD
USB cable
Calibration certificate
Accessories available
11059A Kelvin probe set
11060A Surface-mount device probe
11062A Kelvin clip set
34131A Transit case
34133A Precision electronic test leads
34134A DC-coupled current probe
34136A High-voltage probe
34138A Test lead set
34151A Three signal wedge probe kit
34152A PT100/RTD 4-wire class A sensor kit
34153A PT100/RTD 4-wire class sensor elements
34162A Accessory pouch
34171B Input terminal block
34172B Calibration short
34330A 30-A current shunt
E2308A Thermistor temperature probe
Y1133A Low-thermal external digital multimeter scanning kit
Definitions
Specification (spec)
The warranted performance of a calibrated instrument that
has been stored for a minimum of 2 hours within the operating
temperature range of 0 – 55 °C and after a 60-minute warm
up period. All specifications include measurement uncertainty
and were created in compliance with ISO-17025 methods. Data
published in this document are specifications (spec) only where
specifically indicated.
Typical (typ)
The characteristic performance, which 80% or more of
manufactured instruments will meet. This data is not warranted,
does not include measurement uncertainty, and is valid only at
room temperature (approximately 23 °C).
Nominal (nom)
The mean or average characteristic performance, or the value
of an attribute that is determined by design such as a connector
type, physical dimension, or operating speed. This data is not
warranted and is measured at room temperature
(approximately 23 °C).
Measured (meas)
An attribute measured during development for purposes of
communicating the expected performance. This data is not
warranted and is measured at room temperature
(approximately 23 °C).
T_CAL
The temperature at which the instrument was calibrated.