N1419A Datasheet, PDF (14/16 Pages) Keysight Technologies – Femto/Picoammeter and Electrometer/High Resistance Meter

14 | Keysight | B2980A Series Femto/Picoammeter and Electrometer/High Resistance Meter - Data Sheet
Input/output specifications
Digital I/O
Connector type
Input/output pins
Absolute max input voltage
Absolute min input voltage
Max logic L input voltage
Min logic H input voltage
Max source current
Max sink current
5 V power supply pin
Conputer interfaces
LXI (Rev. 1.4)
USB
GP-IB
Program, software and drivers
Programming
Program memory
LXI compliance
Software available
Drivers available
Environmental specifications
Environment
Operating
Storage
Altitude
Power supply
EMC
Safety
Certifications
Warm-up
Dimensions
Case
Working
Weight
Net
Shipping
DSUB female 9 pins
DIO 7 pins, +5V, GND
5.25 V
–0.25 V
0.8 V, Pull-up to 5 V by 5 kΩ
2.0 V, Pull-up to 5 V by 5 kΩ
1 mA @ Vo = 0 V
50 mA @ Vo = 5 V
Limited to 500 mA, resettable fuse protected
10/100Base-T Ethernet (Sockets, VXI-11 protocol, HiSLIP, and Web user interface)
USB 2.0 (USB-TMC488 and MTP)
USB host controller on the front, USB device interface on the rear
Easy File Access
IEEE-488.2
SCPI
100 kB (1000 lines with 100 characters/line)
LXI Core 2011
Quick I/V Measurement Software, Graphical Web Interface
IVI-C, IVI-COM drivers, LabVIEW drivers
For use in indoor facilities without air conditioning
0 °C to 45 °C (0 °C to 35 °C when charging battery), 30 % to 80 % non-condensing
-20 °C to 60 °C, 10 % to 90 % non-condensing
Operating: 0 m to 2000 m, Storage: 0 m to 4600 m
90 V to 264 V, 47 Hz to 63 Hz, 80 VA maximum
IEC61326-1/EN61326-1, AS/NZS CISPR 11, KC: RRA Notification amending Radio Waves Act Article 58-2
IEC61010-1/EN61010-1, CAN/CSA-C22.2 No. 61010-1-12, C/US
CE, cCSAus, RCM, KC
1 hour
88 mm (2U) x 213 mm (half width) x 348 mm
104 mm x 261 mm x 374 mm (with bumper)
4.3 kg (B2981A), 4.9 kg (B2983A), 4.5 kg (B2985A), 5.1 kg (B2987A)
8.5 kg (B2981A), 9.0 kg (B2983A), 8.7 kg (B2985A), 9.2 kg (B2987A)