N2807B Datasheet, PDF (12/14 Pages) Keysight Technologies – N2807A PrecisionProbe Advanced Kit

Detailed Speciications for Included Hardware:
N2806A Calibration Pulse Generator
Output Parameters
Waveform
Rise time 10% - 90% (Warranted)
Rise time 10% - 90% (Typical)
Fall time 10% - 90% (Warranted)
Fall time 10% - 90% (Typical)
Maximum Square Wave Rep Rate
Output V_HI
Output V_LO
Step Duration
Overshoot
RF Output Impedances
Step pulse, square wave, or drive to DC high or low
< 10 ps
< 9 ps
< 8 ps
< 7 ps
45 GHz
0V
-500 mV / -1.0 V Selectable
Unlimited time hold at high or low voltage
10%, typical
50 Ohms
RF Trigger Input Parameters
Maximum input voltage
Minimum Input dV/dt
Trigger Threshold
Input Impedance
Max Rep Rate
± 700 mV
>2 V/ns
0 V / -250 mV selectable
50 Ohms
45 GHz
Square Wave Trigger Output (Control Module) Parameters
Output Impedance
Amplitude
50 Ohms
1.0 Vp-p (± 500 mV)
Waveform
Square wave
Fequency
4 MHz
General Speciications
Temperature
Humidity
Altitude
Operating: 5 C to 40 C, Non-operating: -40 C to 65 C
Operating: up to 95% relative humidity (non-condensing) at 40 C,
Non-operating: up to 90% relative humidity at 65 C.
Operating: up to 3,000 meters (9,000 feet), Non-operating: up to 15,300 meters (50,000
feet)
Vibration
Power
100 - 240 VAC at 50/60 Hz: maximum input power 25 Watts
Weight
Dimensions
Safety
Remote Head: 3.3 x 2.2 x 0.94 inches, Control Module:
2.16 x 5.4 x 7.75 inches
ESD HBM
>2 kV on remote head RF input , 400 V on remote head RF outputs
12