S01PM5805K016A Datasheet, PDF (8/8 Pages) Kemet Corporation – Molded Plastic Cell Module

Bank Module Supercapacitors – S01 Series, Molded Plastic Cell Module
Prototype Sample Disclaimer
The Customer acknowledges the following limitations of the prototype samples:
(1) Prototype samples are manufactured from preliminary designs and manufacturing processes, may not represent final designs, have not been released for
commercial use and are not subject to the same quality control procedures applicable to released products;
(2) Prototype samples are not qualified parts and are provided as-is by KEMET Electronics Corporation, which specifically disclaims any and all warranties and
guarantees, explicit or implied, including without limitation the warranties of merchantability and fitness for a particular purpose or use;
(3) Prototype samples are not intended for commercial use, are provided for engineering evaluation only and are not recommended for use in the Customer’s
production line; and
(4) The Customer assumes the risk of any and all uses that the Customer makes of the prototype samples.
Prototype Copyright Notice
COPYRIGHT KEMET ELECTRONICS CORPORATION 2013, all rights reserved
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 [phone] • www.kemet.com
S6005_S01 • 11/19/2013 8