S01PM5805K016A Datasheet, PDF (7/8 Pages) Kemet Corporation – Molded Plastic Cell Module

Bank Module Supercapacitors – S01 Series, Molded Plastic Cell Module
Other KEMET Resources
Tools
Resource
Location
Configure A Part: CapEdge
SPICE & FIT Software
http://capacitoredge.kemet.com
http://www.kemet.com/spice
Search Our FAQs: KnowledgeEdge
Electrolytic LifeCalculator
http://www.kemet.com/keask
http://www.kemet.com:8080/elc
Product Information
Resource
Location
Products
Technical Resources (Including Soldering Techniques)
http://www.kemet.com/products
http://www.kemet.com/technicalpapers
RoHS Statement
Quality Documents
http://www.kemet.com/rohs
http://www.kemet.com/qualitydocuments
Resource
Product Request
Location
Sample Request http://www.kemet.com/sample
Engineering Kit Request http://www.kemet.com/kits
Resource
Contact
Location
Website
Contact Us
Investor Relations
Call Us
Twitter
www.kemet.com
http://www.kemet.com/contact
http://www.kemet.com/ir
1-877-MyKEMET
http://twitter.com/kemetcapacitors
Disclaimer
All product specifications, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and
verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.
All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.
Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are
not intended to constitute – and KEMET specifically disclaims – any warranty concerning suitability for a specific customer application or use. The Information is intended for use only
by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise
provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still
occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective
circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not
be required.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 [phone] • www.kemet.com
S6005_S01 • 11/19/2013 7