ERP610W102MDF0 Datasheet, PDF (7/10 Pages) Kemet Corporation – Radial Leaded Ceramic Disc Capacitors

Radial Leaded Ceramic Disc Capacitors
Safety Standard Recognized, ERP610 Series, Encapsulated, X1 760 VAC/Y1 500 VAC (Industrial Grade)
Soldering and Mounting Information
Soldering Temperature
Solder Duration
Distance from
component body
CSA (cUL recognition)
Soldering Specifications
Solderability
235°C ± 5°C
Resistance to Soldering
Heat
260°C ± 5°C
2 seconds ± 0.5 seconds 10 seconds ± 1.0 seconds
≥ 2 mm
≥ 5 mm
C 22.2 No. 1-M90 (Ur=250 VAC)
216038
Soldering test for capacitors with wire leads: (according to IEC 60068-2-20, solder bath method)
Sodering Recommendations
When soldering this product to a PCB/PWB, do not exceed the solder heat resistance specification of the capacitor.
Subjecting this product to excessive heating could reflow the solder joint between the lead and ceramic element and/or may
result in thermal shocks that can crack the ceramic element.
Cleaning Recommendations
The components should be cleaned immediately following the soldering operation with vapor degreasers.
Marking
EVOX RIFA
Trademark¹
IEC 60384-14 Marking
Capacitor Class
and Rated Voltage
Series Name
Front
Approval
Markings
Capacitance
Tolerance Code
(1 Character)
Rated Capacitance
(3 Characters)
EVOX RIFA
Trademark¹
Rated
Capacitance
(3 Characters)
Back
Series Name
Capacitor
Class and
Rated Voltage
Capacitance
Tolerance Code
(1 Character)
1 _{EVOX RIFA and all associated products were acuired by KEMET in 2007. The EVOX RIFA trademark is still used on the capacitor marking.}
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1085_ERP610 • 9/13/2016 7