ERP610W102MDF0 Datasheet, PDF (5/10 Pages) Kemet Corporation – Radial Leaded Ceramic Disc Capacitors

Radial Leaded Ceramic Disc Capacitors
Safety Standard Recognized, ERP610 Series, Encapsulated, X1 760 VAC/Y1 500 VAC (Industrial Grade)
General Specifications/Performance Characteristics
Dielectric/Temperature Characteristic
Operating Temperature Range:
Capacitance Change with Reference to +25°C
and 0 VDC Applied (TCC):
Test Voltage Between Terminals
U2J
Y5S
Y5T
−40°C to +125°C
−750 ±120 ppm/ºC
±22%
+22%/−33%
Component test:
4,000 VAC, 50 Hz, 2 seconds
As repeated test admissible only once with
4,000 VAC, 50 Hz, 60 seconds
Random sampling test (destructive test):
4,000 VAC, 50 Hz, 60 seconds
Y5U
22%/−56%
Dielectric Strength of Body Insulation
1_{Dissipation Factor (tanδ) at +25ºC}1
0.50%
4,000 VAC, 50 Hz,60 seconds (destructive test)
2.50%
Insulation Resistance (IR) Limit at +25°C
10,000 MΩ Minimum
(500 VDC applied for 60±5 seconds at 25°C)
*C = Nominal capacitance
1 _{Capacitance and Dissipation Factor (DF) measured under the following conditions:}
U2J: 1 MHz ± 100 kHz and 1.0 ±0.2 Vrms
Y5S, Y5T and Y5U: 1 kHz ± 50 Hz and 1.0 ±0.2 Vrms
Note: When measuring capacitance, it is important to ensure the set voltage level is held constant. The HP4284 & Agilent E4980 have a feature known as
Automatic Level Control (ALC). The ALC feature should be switched to "ON."
Table 1 – Product Ordering Codes and Ratings
Dielectric/
Temp.
Char.
U2J
Y5S
Y5T
Y5U
KEMET
Part Number
ERP610W330
ERP610W470
ERP610W680
ERP610W101
ERP610W151
ERP610W221
ERP610W331
ERP610W471
ERP610W681
ERP610W102
ERP610W152
ERP610W222
ERP610W272
ERP610W332
ERP610W392
ERP610W472
KEMET
Part Number
Capacitance
33 pF
47 pF
68 pF
100 pF
150 pF
220 pF
330 pF
470 pF
680 pF
1000 pF
1500 pF
2200 pF
2700 pF
3300 pF
3900 pF
4700 pF
Capacitance
Capacitance
Tolerance
±10%
±20%
Capacitance
Tolerance
Dimensions (mm)
Body
Diameter
(Maximum)
Body
Thickness
(Maximum)
Lead
Diameter
Lead Spacing
Bulk
Ammo
Packaging Packaging
6.0
8.0
9.0
10.0
12.0
13.0
15.0
17.0
Body Diameter
(Maximum)
0.6
0.8
5.0
Body Thickness
(Maximum)
Lead Diameter
10
12.5
Lead Spacing
(1) To properly complete ordering code, enter the three-digit alphanumeric "Packaging Code." See "Dimensions" section of this document, page 2, for
available options.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1085_ERP610 • 9/13/2016 5