ERK610Z102KCF0 Datasheet, PDF (7/11 Pages) Kemet Corporation – Radial Leaded Ceramic Disc Capacitors

Radial Leaded Ceramic Disc Capacitors
Safety Standard Recognized, ERK610 Series, Encapsulated, X1 440 VAC/Y2 300 VAC (Industrial Grade)
Soldering and Mounting Information
Soldering Temperature
Solder Duration
Distance from
component body
CSA (cUL recognition)
Soldering Specifications
Solderability
235°C ± 5°C
Resistance to Soldering
Heat
260°C ± 5°C
2 seconds ± 0.5 seconds 10 seconds ± 1.0 seconds
≥ 2 mm
≥ 5 mm
C 22.2 No. 1-M90 (Ur=250 VAC)
216038
Soldering test for capacitors with wire leads: (according to IEC 60068-2-20, solder bath method)
Sodering Recommendations
When soldering this product to a PCB/PWB, do not exceed the solder heat resistance specification of the capacitor.
Subjecting this product to excessive heating could reflow the solder joint between the lead and ceramic element and/or may
result in thermal shocks that can crack the ceramic element.
Cleaning Recommendations
The components should be cleaned immediately following the soldering operation with vapor degreasers.
Marking
Series Name
IEC 60384-14 Marking
Capacitor Class
and Rated Voltage
EVOX RIFA
Trademark¹
Front
Rated Capacitance
(3 Characters)
Capacitance
Tolerance Code
(1 Character)
Series Name
Approval
Markings
Rated Capacitance
(3 Characters)
Back
EVOX RIFA
Trademark¹
Capacitor
Class and
Rated Voltage
Capacitance
Tolerance Code
(1 Character)
1 _{EVOX RIFA and all associated products were acuired by KEMET in 2007. The EVOX RIFA trademark is still used on the capacitor marking.}
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1083_ERK610 • 9/13/2016 7