ERK610Z102KCF0 Datasheet, PDF (6/11 Pages) Kemet Corporation – Radial Leaded Ceramic Disc Capacitors

Radial Leaded Ceramic Disc Capacitors
Safety Standard Recognized, ERK610 Series, Encapsulated, X1 440 VAC/Y2 300 VAC (Industrial Grade)
General Specifications/Performance Characteristics
Dielectric/Temperature Characteristic
Operating Temperature Range:
Capacitance Change with Reference to +25°C
and 0 VDC Applied (TCC):
Test Voltage Between Terminals
U2J
±60 ppm/ºC
Y5S
Y5T
−40°C to +125°C
±22%
+22%/−33%
Component test:
2,600 VAC, 50 Hz, 2 seconds
As repeated test admissible only once with
2,600 VAC, 50 Hz, 60 seconds
Random sampling test (destructive test):
2,600 VAC, 50 Hz, 60 seconds
Y5U
22%/−56%
Dielectric Strength of Body Insulation
1_{Dissipation Factor (tanδ) at +25ºC}1
0.50%
2,600 VAC, 50 Hz,60 seconds (destructive test)
2.50%
Insulation Resistance (IR) Limit at +25°C
6,000 MΩ Minimum
(500 VDC applied for 60±5 seconds at 25°C)
*C = Nominal capacitance
1 _{Capacitance and Dissipation Factor (DF) measured under the following conditions:}
U2J: 1 MHz ± 100 kHz and 1.0 ±0.2 Vrms
Y5S, Y5T and Y5U: 1 kHz ± 50 Hz and 1.0 ±0.2 Vrms
Note: When measuring capacitance, it is important to ensure the set voltage level is held constant. The HP4284 & Agilent E4980 have a feature known as
Automatic Level Control (ALC). The ALC feature should be switched to "ON."
Table 1 – Product Ordering Codes and Ratings
Dielectric/
KEMET
Temp. Char. Part Number
U2J
ERK610Z330
ERK610Z470
Y5S
ERK610Z680
ERK610Z101
ERK610Z151
Y5T
ERK610Z221
ERK610Z331
ERK610Z471
ERK610Z681
ERK610Z102
Y5U
ERK610Z152
ERK610Z222
ERK610Z332
ERK610Z392
ERK610Z472
KEMET
Part Number
Capacitance
33 pF
47 pF
68 pF
100 pF
150 pF
220 pF
330 pF
470 pF
680 pF
1000 pF
1500 pF
2200 pF
3300 pF
3900 pF
4700 pF
Capacitance
Capacitance
Tolerance
Dimensions (mm)
Body
Diameter
(Maximum)
Body
Thickness
(Maximum)
Lead
Diameter
Lead Spacing
Bulk
Ammo
Packaging Packaging
±10%
±20%
Capacitance
Tolerance
8.0
6.0
9.0
7.0
8.0
10.0
12.0
13.5
Body Diameter
(Maximum)
0.6
0.8
4.5
Body Thickness
(Maximum)
Lead Diameter
5
7.5
10
12.5
Lead Spacing
(1) To properly complete ordering code, enter the three-digit alphanumeric "Packaging Code." See "Dimensions" section of this document, page 2, for
available options.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1083_ERK610 • 9/13/2016 6