C4GADUB4100AA4J Datasheet, PDF (5/10 Pages) Kemet Corporation – Printed Circuit Board Mount Power Film Capacitors

Power and AC Film Capacitors
Printed Circuit Board Mount Power Film Capacitors – C4G Series, Axial Round, 250 – 850 VDC/160 – 450 VAC
Table 1 – Ratings & Part Number Reference cont'd
Maximum
Dimensions
Cap Value
(µF)
VDC
VAC
Peak
VDC
(mm)
DL
0.15
850
0.22
850
0.33
850
0.47
850
0.68
850
1
850
1.5
850
2
850
2.2
850
2.5
850
3
850
3.3
850
4
850
Capacitance
Value (µF)
VDC
450
1200
10
33
450
1200
12
33
450
1200
14.5
33
450
1200
17
33
450
1200
20.5
33
450
1200
20.5
44
450
1200
24.5
44
450
1200
28.5
44
450
1200
29.5
44
450
1200
31.5
44
450
1200
28
58
450
1200
29.5
58
450
1200
32.5
58
VAC D (mm) D (mm) L (mm)
(1) A = No fire retardant; S = fire retardant (on request)
(2) U = Tape and resin protection; 0 = unprotected (on request)
(3) K = ±10%, J = ±5%
Ripple
Current
100 kHz
70°C (A)
5
7
9
9
9
9
12
12
12
12
12
12
12
Ripple
Current
Peak
Current
(A)
32
46
69
99
143
140
210
280
308
350
270
297
360
Peak
Current
ESR
(Maximum)
100 kHz
(mΩ)
14.5
10.3
7.1
5.4
4.2
4.7
3.5
3.1
3
2.9
3.6
3.5
3.2
ESR
dV/dt
(V/
µs)
Packaging
Quantity
Part Number
210
210
210
210
210
140
140
140
140
140
90
90
90
dV/dt
(V/µs)
400
300
200
150
100
100
70
50
50
50
30
30
30
Packaging
Quantity
C4G(1)M(2)B3150AA0(3)
C4G(1)M(2)B3220AA0(3)
C4G(1)M(2)C3330AA0(3)
C4G(1)M(2)C3470AA0(3)
C4G(1)M(2)C3680AA0(3)
C4G(1)M(2)C4100AA1(3)
C4G(1)M(2)D4150AA1(3)
C4G(1)M(2)D4200AA1(3)
C4G(1)M(2)D4220AA1(3)
C4G(1)M(2)D4250AA1(3)
C4G(1)M(2)D4300AA3(3)
C4G(1)M(2)D4330AA3(3)
C4G(1)M(2)D4400AA3(3)
Part Number
Environmental Compliance
As an environmentally conscious company, KEMET is working continuously with improvements concerning the environmental effects of
both our capacitors and the production of them.
In Europe (RoHS Directive) and in some other geographical areas like China, legislation has been put in place to prevent the use of
some hazardous materials, like Lead (Pb), in electronic equipment. All products in this catalog are produced to help our customers'
obligations to guarantee their products to fulfill these legislative requirements. The only material of concern in our products has
been Lead (Pb), which has been removed from all designs to fulfill the requirement of containing less than 0.1% of Lead in any
homogeneous material.
KEMET will closely follow any changes in legislation world wide and makes any necessary changes in its products, whenever needed.
Some customer segments like Medical, Military and Automotive Electronics may still require the use of Lead in electrode coatings. To
clarify the situation and distinguish products from each other, a special symbol is used on the packaging labels for RoHS compatible
capacitors.
Because of customer requirements there may appear additional markings like LF = Lead Free or LFW = Lead Free Wires on the label.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 [phone] • www.kemet.com
F3040_C4G_AXIAL • 4/20/2016 5