|
C4GADUB4100AA4J Datasheet, PDF (3/10 Pages) Kemet Corporation – Printed Circuit Board Mount Power Film Capacitors | |||
|
◁ |
Power and AC Film Capacitors
Printed Circuit Board Mount Power Film Capacitors â C4G Series, Axial Round, 250 â 850 VDC/160 â 450 VAC
Performance Characteristics
Temperature Range
Maximum Permissible Ambient
Temperature
IEC Climatic Category
Peak Non-Repetitive Maximum
Current
Test Voltage Terminal to Terminal
(VTT)
Test Voltage Terminal to Case
(VTC)
Insulation Resistance Test
Conditions
Dissipation Factor (DF)
Capacitance Deviation in
Operating Temperature Range of
-40°C to +85°C
Life Expectancy
Failure Quota
Change of Capacitance vs.
Operating Time
Protection
Flame Retardant (IEC 384â1)
Leads
Installation
Damp Heat Test
-40°C to +85°C
+70°C
40/85/56 according to IEC 68â1
IPKR x 1.5
2 Vn for 10 seconds
3 k VDC 50 Hz for 60 seconds
Temperature: +25°C ±5%
Voltage charge time: 1 minute
Test voltage: 100 VDC
Typical value (Ris x C): 3,000
seconds
⤠5 x 10-4 at 1 kHz and 20°C
±1.5% maximum on capacitance
value measured at +20°C
⥠30,000 hours at VRMS, ⥠100,000
hours at Vn
300/109 components per hour
-3% after 30,000 hours at VRMS or
after 100,000 hours at Vn
Polyester wrapping with epoxy
resin fill
Standard execution: non-flame
retardant
On request: flame retardant
execution Category C
Tinned copper (lead content = 5%)
Any position
Test Conditions
Relative humidity: 93% ± 2%
Temperature: +40°C
Test duration: 56 days
Capacitance change: ⤠± 5%
DF change: ⤠50% of nominal
value at 1 kHz
Insulation resistance: ⥠50% of
limit value
© KEMET Electronics Corporation ⢠P.O. Box 5928 ⢠Greenville, SC 29606 (864) 963-6300 ⢠www.kemet.com
F3040_C4G_AXIAL ⢠4/20/2016 3
|
▷ |