FA0H104ZF Datasheet, PDF (4/13 Pages) Kemet Corporation – Supercapacitors FA Series

Supercapacitors – FA Series
Table 1 – Ratings & Part Number Reference
Part Number
FA0H473ZF
FA0H104ZF
FA0H224ZF
FA0H474ZF
FA0H105ZF
FA1A223ZF
FA1A104ZF
FA1A224ZF
FA1A474ZF
Maximum
Operating Voltage
(VDC)
5.5
5.5
5.5
5.5
5.5
11.0
11.0
11.0
11.0
Nominal Capacitance
Charge
System (F)
0.047
0.10
0.22
0.47
1.0
0.022
0.10
0.22
0.47
Discharge
System (F)
0.075
0.16
0.35
0.75
1.6
0.035
0.16
0.35
0.75
Maximum ESR
@ 1 kHz (Ω)
20.0
8.0
5.0
3.5
2.5
20.0
8.0
6.0
4.0
Maximum
Current @ 30
Minutes (mA)
0.071
0.15
0.33
0.71
1.5
0.066
0.30
0.66
1.41
Weight (g)
0.071
0.15
0.33
0.71
1.5
0.066
0.30
0.66
1.41
Specifications
Item
Category Temperature Range
Maximum Operating Voltage
Capacitance
Capacitance Allowance
ESR
Current (30 minutes value)
Capacitance
-25ºC to +70ºC
5.5 VDC, 11 VDC
Refer to Table 1
+80%, -20%
Refer to Table 1
Refer to Table 1
FA Type
Surge
ESR
Current (30 minutes value)
Appearance
Characteristics in Different
Temperature
Capacitance
ESR
Capacitance
ESR
Capacitance
ESR
Current (30 minutes value)
Capacitance
ESR
Current (30 minutes value)
Phase 2
Phase 3
Phase 5
Phase 6
≥ 70% of initial value
≤ 300% of initial value
≤ 150% of initial value
Satisfy initial ratings
≤ 1.5 CV (mA)
Within ±20% of initial value
Satisfy initial ratings
Satisfy initial ratings
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 [phone] • www.kemet.com
Test Conditions
(conforming to JIS C 5160-1)
Refer to “Measurement Conditions”
Refer to “Measurement Conditions”
Measured at 1 kHz, 10 mA; See also
“Measurement Conditions”
Refer to “Measurement Conditions”
Surge voltage:
Charge:
Discharge:
Number of cycles:
Series resistance:
Discharge
resistance:
Temperature:
6.3 V (5.5 V type)
12.6 V (11 V type)
30 seconds
9 minutes 30 seconds
1,000
0.047 F
300 Ω
0.10 F
150 Ω
0.22 F
56 Ω
0.47 F
30 Ω
1.0 F, 1.5 F
15 Ω
0Ω
70 ±2ºC
Conforms to 4.17
Phase 1:
Phase 2:
Phase 4:
Phase 5:
Phase 6:
+25 ±2ºC
-25 ±2ºC
+25 ±2ºC
+70 ±2ºC
+25 ±2ºC
S6018_FA • 3/7/2014 4