F125PP102J050V Datasheet, PDF (4/15 Pages) Kemet Corporation – Surface Mount Metallized PPS Film Capacitor

Surface Mount Metallized PPS Film Capacitor
SMC Series Encapsulated, Size 2220 – 6560, 50 – 400 VDC
Performance Characteristics
Rated Voltage (VDC)
Rated Voltage (VAC)
Capacitance Range (μF)
Chip Size (EIA)
Capacitance Tolerance
Category Temperature Range
Rated Temperature
Voltage Derating
Climatic Category
Test Voltage
Insulation Resistance
Dissipation Factor
Pulse Rise Time
50
100
250
400
30
63
160
200
0.001 – 3.3
0.001 – 1.5
0.001 – 0.47
0.001 – 0.22
2220 – 6560
±2%, ±2.5%, ±5%
−55°C to +125°C
+100°C
The rated voltage should be decreased with 1.25%/°C from +100°C to
+125°C and 1.5%/°C from +125°C to 175°C
55/125/56
1.6 x V_R, 60 seconds
Measured at +20°C According to IEC 60384–19
Minimum Value Between Terminals
C ≤ 0.33 µF
C > 0.33 µF
V_R ≤ 100
V_R > 100
15,000 MΩ
30,000 MΩ
Maximum Values at +23°C
5,000 MΩ • µF
10,000 MΩ • µF
C ≤ 0.1 µF
0.1 < C ≤ 1 µF
C > 1 µF
1 kHz
0.15%
0.15%
0.15%
10 kHz
0.25%
0.25%
0.30%
100 kHz
0.50%
0.60%
The capacitors can withstand an unlimited number of pulses with a dV/dt
according to Table 1. For voltages (V) lower than the rated voltage (V_R), the
specified dV/dt can be multiplied by V_R/V.
Capacitance vs. Temperature
Dissipation Factor vs. Temperature
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 [phone] • www.kemet.com
F3083_SMC • 2/24/2016 4