F125PP102J050V Datasheet, PDF (11/15 Pages) Kemet Corporation – Surface Mount Metallized PPS Film Capacitor

Surface Mount Metallized PPS Film Capacitor
SMC Series Encapsulated, Size 2220 – 6560, 50 – 400 VDC
Flux & Cleaning
KEMET recommends to use a no-clean flux with a halogen content lower than 0.1%.
To clean the PCB assembly KEMET recommends to use a suitable solvent like Isopropyl alcohol, deionized water or neutral pH
detergents. Aggressive solvents shall not be used. For any different cleaning solvent used please contact KEMET Technical Services to
analyze the potential impact on KEMET products.
Storage and Moisture Recommendations
KEMET SMD Film Capacitors are supplied in a MBB (Moisture Barrier Bag) Class 1. We can guarantee a 24 months shelf life
(temperature ≤ 40°C/relative humidity ≤ 90%). After the MBB has been opened, components may stay in areas with controlled
temperature and humidity (temperature ≤ 30°C/relative humidity ≤ 60%) for 696 hours [MSL 2a]. For longer periods of time and/or
higher temperature and/or higher relative humidity values, it is absolutely necessary to protect the components against humidity. If the
reel inside the MBB is partially used, KEMET recommends to re-use the same MBB or to avoid areas without controlled temperature
and humidity (see above). If the above conditions are not respected, components require a baking (minimum time: 48 hours at 55
±5°C) before the reflow.
Packaging Quantities
Chip Size
(EIA)
2220
2220
2824
2824
2824
4036
5045
6560
Base
(mm)
5
5
6
6
6
9.1
11.5
15
Height
(mm)
3
4
3
3.5
4.5
5.5
6.5
7
Length
(mm)
5.7
5.7
7.3
7.3
7.3
10.2
12.7
16.5
Bulk
2000
2000
2000
2000
1000
1000
1000
800
Reel
Reel
Horizontal Vertical
Orientation Orientation
2400
2100
2500
2300
1700
800
500
600
400
500
200
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 [phone] • www.kemet.com
F3083_SMC • 2/24/2016 11