|
C0402C100J5GAC Datasheet, PDF (1/18 Pages) Kemet Corporation – Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) C0G Dielectric, 10 – 200 VDC (Commercial Grade) | |||
|
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
C0G Dielectric, 10 â 200 VDC (Commercial Grade)
Overview
KEMETâs C0G dielectric features a 125°C maximum operating
temperature and is considered âstable.â The Electronics
Components, Assemblies & Materials Association (EIA)
characterizes C0G dielectric as a Class I material. Components
of this classification are temperature compensating and are
suited for resonant circuit applications or those where Q and
stability of capacitance characteristics are required. C0G exhibits
no change in capacitance with respect to time and voltage and
boasts a negligible change in capacitance with reference to
ambient temperature. Capacitance change is limited to ±30
ppm/ºC from -55°C to +125°C.
Benefits
⢠-55°C to +125°C operating temperature range
⢠RoHS Compliant
⢠EIA 0201, 0402, 0603, 0805, 1206, 1210, 1808, 1812, 1825,
2220, and 2225 case sizes
⢠DC voltage ratings of 10 V, 16 V, 25 V, 50 V, 100 V, and 200 V
⢠Capacitance offerings ranging from 0.5 pF up to 0.47 μF
⢠Available capacitance tolerances of ±0.10 pF, ±0.25 pF, ±0.5
pF, ±1%, ±2%, ±5%, ±10%, and ±20%
⢠No piezoelectric noise
⢠Extremely low ESR and ESL
⢠High thermal stability
⢠High ripple current capability
⢠Preferred capacitance solution at line frequencies and into the
MHz range
Ordering Information
⢠No capacitance change with respect to applied rated DC voltage
⢠Negligible capacitance change with respect to temperature from
-55°C to +125°C
⢠No capacitance decay with time
⢠Non-polar device, minimizing installation concerns
⢠100% pure matte tin-plated termination finish allowing for
excellent solderability
⢠SnPb plated termination finish option available upon request (5%
minimum)
C 1206
C
104
J
3
G
A
C
TU
Ceramic
Case Size
(L" x W")
Specification/
Series1
Capacitance
Code (pF)
0201 C = Standard 2 significant digits +
0402
number of zeros.
0603
Use 9 for 1.0 â 9.9 pF
0805
Use 8 for 0.5 â .99 pF
1206
e.g., 2.2 pF = 229
1210
e.g., 0.5 pF = 508
1808
1812
1825
2220
2225
Capacitance
Tolerance2
B = ±0.10 pF
C = ±0.25 pF
D = ±0.5 pF
F = ±1%
G = ±2%
J = ±5%
K = ±10%
M = ±20%
Voltage
8 = 10 V
4 = 16 V
3 = 25 V
5 = 50 V
1 = 100 V
2 = 200 V
Dielectric
Failure Rate/
Design
Termination Finish3
Packaging/Grade
(C-Spec)4
G = C0G A = N/A
C = 100% Matte Sn Blank = Bulk
TU = 7" Reel
Unmarked
1 Flexible termination option is available. Please see FT-CAP product bulletin C1062_C0G_FT-CAP_SMD
2 Additional capacitance tolerance offerings may be available. Contact KEMET for details.
3 Additional termination finish options may be available. Contact KEMET for details.
4 Additional reeling or packaging options may be available. Contact KEMET for details.
© KEMET Electronics Corporation ⢠P.O. Box 5928 ⢠Greenville, SC 29606 (864) 963-6300 ⢠www.kemet.com
One world. One KEMET
C1003_C0G ⢠11/20/2013 1
|
▷ |