HE83115 Datasheet, PDF (8/10 Pages) King blillion Electronics Co.,Ltd. – 8-BIT MICRO-CONTROLLER

KING BILLION ELECTRONICS CO., LTD
駿億電子股份有限公司
HE83115
HE80000 SERIES
Testing Condition : TEMP=25℃, VDD=3V+/-10%, GND=0V
PARAMETER
I_Fast NORMAL Mode Current System
I_Slow SLOW Mode Current System
I_Idle IDLE Mode Current
System
I_LCD Extra Current if LCD ON System
I_Sleep Sleep Mode Current
System
I_oHPWM PWM Output Drive Current PWMP,
PWMN^*2
I_oLPWM PWM Output Sink Current PWMP,
PWMN^*2
I_oVO DAC Output Current VO
V_iH Input High Voltage
I/O pins
V_iL Input Low Voltage
I/O pins
V_hys Input Hysteresis Width I/O, RSTP_N
I_oH Output Drive Current
I_{oL_1} Output Sink Current
I_{iL_1} Input Low Current
I_{iL_2} Input Low Current
I/O pull-high^*1
I/O pull-low^*1
RSTP_N
I/O
CONDITION
2M ext. R/C
32.768K X’tal
LCD Disable
32.769K X’tal
LCD Disable
LCD Enable
V_DD=3V; V_oh=2V
MIN TYP MAX UNIT
0.75 1 mA
6 9 μA
4 7 μA
2 3 μA
1 μA
12 15
mA
V_DD=3V; V_oL=1V
33 40
mA
V_DD=3V;VO=0~2V,Data=7F 2.5 3
mA
0.8
V
V_DD
0.2 _V
V_DD
Threshold=2/3V_DD(input
from low to high)
Threshold=1/3V_DD(input
from high to low)
1/3
V_DD
V
V_oL=2.0V
50
μA
V_oL=0.4V
V_iL=GND, pull high
Internally
1.0
mA
20
μA
V_iL=GND, if pull high
Internally by user
100
μA
Note:
*1: Drive Current Spec. for Push-Pull I/O port only
Sink Current Spec. for both Push-Pull and Open-Drain I/O port.
*2: This Spec. base on one driver only. There are five build-in driver, so user just multiply
the number of driver he used to one driver current to get the total amount of current.
( I_oHPWM、I_oLPWM * N; N=0,1,2,3,4,5)
8
V3.3E