MDX-02ADCB1AA Datasheet, PDF (2/4 Pages) JDS Uniphase Corporation – Outside Plant CWDM Optical Add/Drop (OSP CWDM OADM)Module

2
Specifications¹
Parameter
Optical Characteristics
CWDM add or drop insertion loss
1310 nm add or drop insertion loss
Through path inserton loss (COM E — COM W)
Monitor tap ratio
1310 nm channel bandwidth
CWDM reflect bandwidth
CWDM channel bandwidth
Channel flatness
Isolation
Adjacent 20 nm spaced channels
Non-adjacent 20 nm spaced channels
Dropped channel rejection at CWDM
Dropped channel rejection at 1310 nm
1310 nm band from CWDM channels
CWDM channels from 1310 nm band
Optical return loss
Input optical power — sum of all channel ports
Polarization dependent loss (PDL)
Polarization mode dispersion (PMD)
Physical Characteristics
Size (H x W x L)
Optical connector type (all ports)
Weight
Environmental Characteristics
Operating ambient temperature
Storage temperature
Relative humidity (non-condensing)
OSP CWDM OADM MODULE
Maximum
Maximum
Maximum
Nominal
Minimum
Minimum
Minimum
Maximum
Minimum
Minimum
Minimum
Minimum
Minimum
Minimum
Minimum
Maximum
Maximum
Maximum
2 Channel
4 Channel
2.5 dB
3.3 dB
1.5 dB
1.5 dB
3.6 dB
3.8 dB
2%
1260 nm to 1360 nm
1463.5 nm to 1617.5 nm
ITU λ ±6.5 nm
0.5 dB
40 dB
45 dB
30 dB
50 dB
50 dB
50 dB
40 dB
1W
0.2 dB
0.2 ps
129.5 x 57.7 x 160.3 mm
129.5 x 86.9 x 160.0 mm
(5.10 x 2.28 x 6.36 in)
(5.10 x 3.42.x 6.30 in)
SC/PC bulkhead
0.91 kg (2 lb)
1.36 kg (3 lb)
Minimum
–40ºC
–40ºC
5%
Maximum
65ºC
85ºC
95%
1
Specifications are worst case end of life over specified temperature and wavelength range.