MDX-02ADCB1AA Datasheet, PDF (1/4 Pages) JDS Uniphase Corporation – Outside Plant CWDM Optical Add/Drop (OSP CWDM OADM)Module

COMMUNICATIONS MODULES & SUBSYSTEMS
WaveReady^TM
Outside Plant CWDM Optical Add/Drop (OSP CWDM OADM) Module
Key Features
• Adds and drops two or four CWDM channels on a single
fiber
• Reusable dropped wavelengths in adjoining spans add
protection or double capacity in a ring
• Extended temperature range makes operation suitable for
outside plant (OSP) cabinet installations
• Ultra-high isolation design eliminates need for channel
power balancing
• Fits into standard LGX™ mounting solutions
• Requires no powering because of thermally stable passive
optics
Applications
• Maximize fiber in local loop
• Overlays CWDM with existing
1310 nm transmission systems
• Provides bidirectional transmission
on a single fiber
• Supports linear and ring architec-
tures requiring wavelength reuse
Compliance
• Channel-plan compliant with
ITU-T G694.2
• NEBS Level 3
The WaveReady™ Outside Plant Coarse Wavelength Division Multiplexer Optical
Add/Drop Module (OSP CWDM OADM) is a flexible, low-cost solution that
enables capacity expansion of existing fiber. Coupled with highly reliable passive
optics that are certified for environmentally hardened applications, the OSP
CWDM OADM lets carriers make full use of the fiber’s available bandwidth in the
local loop.
The OSP CWDM OADM is a universal device configurable for either bidirec-
tional transport over a single fiber or unidirectional transport over a fiber pair.
This family of parts supports a broad range of wavelength-protected
architectures, including dual-homed bus and protected rings over one or two
fibers. The market-standard LGX packaging allows the OSP CWDM OADM to be
readily deployed into existing fiber distribution frames (FDF), or alternatively
adapted for installation in WaveReady shelves.
The OSP CWDM OADM interoperates with both the WaveReady line of trans-
ponder and optical regenerator solutions as well as CWDM transponders and
small form-factor pluggables (SFPs) used in widely available transmission
equipment. With billions of field operating hours, the industry-leading JDSU
optical multiplexing technology offers unparalleled reliability and leading
performance.
NORTH AMERICA: 800 498-JDSU (5378)
WORLDWIDE: +800 5378-JDSU
WEBSITE: www.jdsu.com/waveready