DG1 Datasheet, PDF (3/8 Pages) Japan Aviation Electronics Industry, Ltd. – Interface connector conforming to InfiniBand Standard

MB-0097-2
Materials and Finishes
„ Receptacle (DG1R025HS*, DG1R073HS*)
Components Materials/Finishes
Insulator
Glass filled LCP/
Color: Black(UL94V-0)
Shell
Steel/ Nickel plating
Signal contact Copper alloy/
Contact area: Au plating over Ni
(0.76um min.)
Ground contact
Terminal area: (S) Sn plating
Lock plate
Gasket
Steel/ Tin plating
Stainless steel
Using Cable Harness
„ Plug (DG1P025****, DG1P073****)
Components Materials/Finishes
Backshell
Zinc/ Nickel plating
Lock spring Stainless steel
Lanyard
Polycarbonate(UL94V-0)
Screw
Steel/ Nickel plating
Insulator
Glass filled LCP/
Color: Black(UL94V-0)
Signal contact Copper alloy/ Au plating over
nickel (0.76um min.)
Ground contact Copper alloy/ Au plating over
nickel (0.76um min.)
Paddle card FR-4
Cable clamp Copper alloy/ Nickel plating
Ring
Copper alloy/ Nickel plating
Ordering Information
-Angle receptacle
DG1 R ***　 H　S
Series
*
*Refer to Note 1 below
Receptacle
No. Of contacts
025: 25 pos.(4x)
073: 73 pos. (12x)
Plating
S: Contact area/ 0.76um Au plating,
Lead area/ Sn plating
Contact type
(SMT angle)
*Note 1
Products
DG1R***HS1
DG1R***HS2
DG1R***HS3
DG1R***HS4
DG1R***HS5
DG1R***HS6
DG1R***HS7
DG1R***HS8
DG1R***HS9
Mold boss
No
No
No
Location post
Location post
Location post
Crush pin
Crush pin
Crush pin
Metal boss height:
Xdimension(mm)
2.325
3.125
4.8
2.325
3.125
4.8
2.325
3.125
4.8
JAE PMK Div. Proprietary. Copyright ©　2006，Japan Aviation Electronics Industry, Ltd.
3/8