|
DG1 Datasheet, PDF (1/8 Pages) Japan Aviation Electronics Industry, Ltd. – Interface connector conforming to InfiniBand Standard | |||
|
COMPONENTS PRODUCT INFORMATION
NEW Interface connector conforming to InfiniBand Standard CONNECTOR
DG1 Series
MB-0097-2
July 2006
RoHSãCompliant
This product is a high-speed signal connector for balance transmission compliant to
high-speed serial signal transmission of servers, routers, switches, external storage
and more.
Features
ÂConnector conforming to IBTA (InfiniBand Trade Association) Copper Cable
Standard 4x, 12x.
ÂReceptacle with wide nozzle area for automatic mounting.
ÂOne-touch clip used for panel installation to receptacle
(compatible with panel thickness1.0mm and 0.8mm).
 Shield cover for EMI prevention available for 12x receptacle.
Â2-step lock spring (lanyard) used for secure locking and release of
mated plug and receptacle.
ÂCollaborative development of cable harness with GORE from U.S.A. proceeds.
A plug connector will be provided with cable harness.
Please contact us for further information.
Applications
Servers, Storages, Routers, Switches and Others
General Specifications
ÂNo. of contacts
<4x>:signal 8 pair 25 pos.
<12x>: signal 24 pair 73 pos.
ÂContact resistance: Initial 80m ohm max.
(20m ohm max. after test)
ÂDielectric withstanding voltage:
DC500V (per minute)
ÂOperating temperature:
-25 to+70 Deg. C
ÂInsertion/ Withdrawal force:
Insertion force <4x>/ 56N max.
<12x>/ 73N max.
Withdrawal force <4x>/ 49N max.
<12x>/ 59N max.
ÂRated Current: 0.5A
ÂInsulation resistance: 1000M ohm min.
ÂLife time: 250 times
ÂImpedance:100 ohm +/-10%(peak)
ÂCrosstalk: Near-end 4% max.
JAE PMK Div. Proprietary. Copyright ©ã2006ï¼Japan Aviation Electronics Industry, Ltd.
1/8
|
▷ |