DEIC420 Datasheet, PDF (3/7 Pages) IXYS Corporation – 20 Ampere Low-Side Ultrafast RF MOSFET Driver

DEIC420
Lead Description - DEIC420
SYMBOL
FUNCTION
VCC
Supply Voltage
IN
Input
OUT
Output
GND
Power Ground
DESCRIPTION
Positive power-supply voltage input. These leads provide power to
the entire chip. The range for this voltage is from 8V to 30V.
Input signal-TTL or CMOS compatible.
Driver Output. For application purposes, this lead is connected,
directly to the Gate of a MOSFET
The system ground leads. Internally connected to all circuitry, these
leads provide ground reference for the entire chip. These leads
should be connected to a low noise analog ground plane for
optimum performance.
Note 1: Operating the device beyond parameters with listed “absolute maximum ratings” may cause permanent
damage to the device. Typical values indicate conditions for which the device is intended to be functional, but do not
guarantee specific performance limits. The guaranteed specifications apply only for the test conditions listed.
Exposure to absolute maximum rated conditions for extended periods may affect device reliability.
CAUTION: These devices are sensitive to electrostatic discharge; follow proper ESD procedures
when handling and assembling this component.
Figure 2 - DEIC420 Package Photo And Outline
Figure 3a - Characteristics Test Diagram
VIN
Figure 3b - Timing Diagram
5V
90%
INPUT 2.5V
10%
0V
tONDLY
PWMIN
tR
Vcc
90%
OUTPUT
10%
0V
3
tOFFDLY
tF