IXD_609SI Datasheet, PDF (1/11 Pages) IXYS Corporation – AEC Q100 Qualified

INTEGRATED CIRCUITS DIVISION
IXD_609SI
Automotive Grade
9-Ampere, Low-Side, Ultrafast MOSFET Drivers
Features
• AEC Q100 Qualified
• 9A Peak Source/Sink Drive Current
• Wide Operating Voltage Range: 4.5V to 35V
• AEC Q100 Grade 1 -40°C to +125°C Operating
Temperature Range
• Logic Input Withstands Negative Swing of up to 5V
• Matched Rise and Fall Times
• Low Propagation Delay Time
• Low, 10A Supply Current
• Low Output Impedance
Applications
• Automotive DC/DC Regulators
• Electronic Power Steering
• Electric Vehicle Power Train Drives
• Brushless DC Motors
Pb
e3
Description
The IXD_609SI is an automotive grade, high-speed
gate driver that is qualified according to AEC Q100
standards. The IXD_609SI output can source and sink
9A of peak current, while producing rise and fall times
of less than 45ns. Both the output and input are rated
to 35V. The input is virtually immune to latch-up, and
proprietary circuitry eliminates cross conduction and
"shoot-through." The IXD_609SI has a Grade 1, -40°C
to +125°C ambient operating temperature range.
The IXDD609SI is configured as a non-inverting driver
with an enable, the IXDN609SI is configured as a
non-inverting driver, and the IXDI609SI is configured
as an inverting driver. The AEC Q100 qualified
IXD_609SI is available in an 8-pin Power SOIC
package with an exposed metal back.
Ordering Information
Part Number
IXDD609SI
IXDD609SITR
IXDI609SI
IXDI609SITR
Logic
Configuration
IN
OUT
EN
IN
OUT
IXDN609SI
IN
OUT
IXDN609SITR
Package Type
8-Pin Power SOIC
with Exposed Metal Back
Packing
Method
Tube
Quantity
100
Tape & Reel
2000
Tube
100
Tape & Reel
2000
Tube
100
Tape & Reel
2000
DS-IXD_609SI-R01
www.ixysic.com
1