GXP6W Datasheet, PDF (2/4 Pages) Baumer IVO GmbH & Co. KG – Absolute encoders - bus interfaces

Absolute encoders - bus interfaces
Shaft with clamping or synchro flange
Multiturn encoder 13 bit ST / 12 bit MT, Interbus
Part number
GXP6W.
10
01
Interface
01 Interbus K3
E-connection
A0 M23 connector, 2 x 9-pin axial
A1 M23 connector, 2 x 9-pin radial
20 Bus cover with cable gland
Voltage supply
10 10...30 VDC, galvanically isolated
Flange / Shaft
0 Clamping flange / ø10 mm IP 54
A Clamping flange / ø10 mm IP 65
1 Synchro flange / ø6 mm IP 54
B Synchro flange / ø6 mm IP 65
GXP6W
Accessories
Connectors and cables (page %S)
Z 153.B01 Mating connector M23, 9-pin, less cable
Z 153.S01 Cable connector M23, 9-pin, less cable
Mounting accessories (page %S)
Z 119.006 Eccentric fixing, single
Z 119.013 Adaptor plate for clamping flange for
modification into synchro flange
Z 119.015 Mounting adaptor for synchro flange
Z 119.017 Mounting angle for clamping flange
Z 119.025 Adaptor plate for clamping flange, mounting
by eccentric fixings (order separately)
Z 119.035 Bearing flange for encoders with synchro
flange
Interbus features
Bus protocol
Interbus
Device profile
Encoder profile 71
Connection
IB user type
2 wire remote bus
IB bus width
4 byte
PCP length
No parameter channel
ID-Code
55
Interface
Type A1
Type W1
2 wire remote bus (galvanically isolated)
2 wire remote bus
Programmable
parameters
– Resolution steps and revolutions
– Rotating direction and code
– Preset
– Zero point shift
– Offset
– Measuring range
– Encoder reset
2
www.baumerivo.com