|
58286 Datasheet, PDF (8/31 Pages) ITT Industries – Miniature circular connectors | |||
|
◁ |
KPT/KPSE
KPSE High performance crimp contact connectors
How to order
Miniature circular connectors
KPSE 00 E 18 - 32 P X *
Series prefix
KPSE â ITT Cannon prefix
MS â MIL-C-26482 prefix
Shell style
ITT Cannon designation
00 â wall mounting receptacle
01 â cable connecting plug
02 â box mounting receptacle
06 â straight plug
07 â jam nut receptacle
08 â 90° angle plug
Class
A â general duty (not MS approved)
B â general duty with strain relief (not MS approved)
E â grommet seal (MS specification)
F â grommet seal with strain relief (MS specification)
G â gland seal for jacketed cable
J â gland seal with strain relief for jacketed cable
(not MS approved)
P â for potting (MS specification)
Shell style
8, 10, 12, 14, 16, 18, 20, 22 und 24
Contact arrangement
see pages 9 â 11
Contact type
P â pin
S â socket
Alternate insert position
W, X, Y and Z (omit for normal), see page 12
Modification code
DN â Shrink boot adapter for shell styles 00, 01, 06 and 07
DZ â Endbell for shielding braids and shrink boots.
Class E will always be used for these modifications.
Consult factory for other modifications. Omit first digit (0) of shell style
indication when using a modification code.
*Note:
The above mentioned order reference explanation refers only to the ITT Cannon
ordering system. For other order references according to a specification, please
consult the cross reference list on pages 29 â 30.
8
Subject to changes
|
▷ |