58286 Datasheet, PDF (3/31 Pages) ITT Industries – Miniature circular connectors

KPT/KPSE
Technical Data
Material and Finishes
Shell
Insulator
Grommet and Seal
Contacts
Mechanical Data
Shell styles
06 – Straight plug
Shell sizes
Polarisation/Coupling
Service classes
E – Grommet seal
Water tightness
Operating temperature
Durability
Vibration
Electrical Data
Number of contacts
Wire size AWG
Contact termination
Contact rating
Insulation resistance
Service rating
Exception
Service rating between the
central contact and the housing
of the coaxial contact
Operating voltage and connector usage
Miniature circular connectors
KPT
KPSE
Aluminum alloy, conductive olive drab chromate over cadmium finish per QQ-P-416
Polychloroprene
Polychloroprene
Polychloroprene
Polychloroprene
Copper alloy, gold plated
Copper alloy, gold plated
00 – Wall mounting receptacle
01 – Cable connecting plug
02 – Box mounting receptacle
07 – Jam nut receptacle
08 – Plug with 90° termination assemblies
B – Thru-bulkhead receptacle (KPT only)
8 thru 24
five keyways/three point bayonet
A – General duty
B – General duty with strain relief
E – Grommet seal
F – Grommet seal with strain relief
G – Gland seal for jacketed cable
J – Gland nut with strain relief for jacketed cable
P – for potting
see also pages 5 and 8
Acc. to VG 95319 Part 2, Test No. 5.9.2
For styles A to E and J to W, Z1, Z2 and Z3 and gaskets style A and B only
Test pressure 0,2 bar overpressure
Test duration 48 h
Test temperature 25 ± 3°C
The connector shall be free of moisture
– 55 / 125°C
min. 500 mating cycles
200 m/s² at 10 to 2000 Hz
2 thru 61
16 thru 24
Solder
Size AWG
20
16
⊕ 5000 MW
Test voltage
Sea level
21336 m
(70 000 ft.)
Rated current A
7,5
22,0
Test current A
7,5
13,0
3 thru 61
12 thru 24
Crimp
Millivolt drop mV
less than 55
less than 50
Service class
1
2
1
2
Vrms
VDC With scoop proof connectors
1500
2100 operating voltages
2300
3200 acc. to MIL-C-26482 and
375
535
VG 96912 are
550
770
permitted
Operating voltage
Service class
1
2
VG 95328
140 VDC/100 VAC
165 VDC/115 VAC
MIL-C-26482
850 VDC/600 VAC
1400 VDC/1000 VAC
Connectors are equipment which must not be separated or mated when used as per determination. As acc. to
specification the connectors are suitable for an operating voltage of 50 V (see Product Safety Information).
However, this is only valid when the connectors are free accessible during operation and consequently might
be touchable. When the connectors will be operated with line voltage, ITT Cannon offers a solution, too. Please
consult factory.
3