TNM6S10-0004P1L Datasheet, PDF (75/96 Pages) ITT Industries – CANNON TRIDENT SERIES

Cannon Trident Connectors
Automatic Application Tools
Mini Applicators
(for Stamped Contacts)
Mini Applicators are interchangeable
modules that will fit into many
standard crimping machines. They are
available for all sizes of stamped sig-
nal and power contacts.
AWG
Size
14-16
16-18
20-26
12-14
14-16
18-20
Contact
Description
Trident Signal
Trident Signal
Trident Signal
Trident 30 A Power
Trident 30 A Power
Trident 30 A Power
Mecal
Part Number
121586-5240
121586-5217
121586-5239
*
*
*
* For details please consult the factory
Testing Gauge
(for Stamped Contacts)
The testing gauge will be helpful to check
whether a crimp is ok or not.
The contact should be inserted into the
test fixture without scratching the test
hole (diameter 3.3 mm).
Description Part Number
Testing Gauge 317-8675-133
Pneumatic Table Crimp Tool
(for Machined Contacts)
Nomenclature Description
Part
Number
This Hand Crimp Tool fully meets the
WA27F-CE Pneumatic Crimp Tool 121586-5067
requirements of specification MIL-C-22520. WA22F-CE Pneumatic Crimp Tool 121586-5070
The tool produces eight-indent crimp termi- BM-2
Bench Mount
121586-5068
nations of excellent quality. Together with _WA10
the bench mount BM-2 and the food pedal
Foot Pedal
121586-5069
WA-10 it becomes an installed tool facilitat-
ing the work: The Hands of the operator are
free to insert the contact and the wire and
to remove the terminated contact.
AWG
12-20
20-32
Semi-Automated
Crimp Machine HACS-5
(for Machined Contacts)
With the semi-automated crimp
machine HACS-5 machined contacts are
terminated fast and reliably. 20 to 25
crimp terminations per minute can be
achieved. The user has the choice
between automatic and manual opera-
tion.
Nomenclature Description
HACS-5 Semi-Automated Crimp Machine
Electrical Data
Protection Class: IP51
Electrical Power: 240 V ac, 50 Hz
Part
Number
120090-0118
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
www.ittcannon.com
75