TNM6S10-0004P1L Datasheet, PDF (18/96 Pages) ITT Industries – CANNON TRIDENT SERIES

Cannon Trident Connectors
Snap Together - Slimline
The Slimline Range offers a low profile
connector system that is well suited for circuit
board applications. The precision machined
contacts are ideal for power and sensitive
signals. All Snap Together - Slimline connectors
are RoHS Compliant.
Applications:
• Junction Boxes.
• Communications equipment.
• Test equipment.
• Instrumentation.
Product Features
• Less than 10,00 (.393) width on PC board.
• Pin headers pre-loaded with straight or 90° machined solder tail pins.
• Mating plug accepts all Trident signal crimp socket contacts, see page 64.
• Plugs have integrally molded quick connect/disconnect latches.
• Five single row contact arrangements available.
• Recognized under the component program of UL Inc.
• Gold plated version available with earth pin capability.
• 10 A per circuit.
Performance Specifications
Operating Voltage¹ Up to 250 V ac rms
Contact Current Rating² Up to 10 A
Operating Temperature -55°C to +105°C (-67°F to +221°F) for free Plug & Receptacles
-40°C to +105°C (-40°F to +221°F) for PCB Mounted Receptacles
Insulation Resistance 5000MW min. at 500 V dc
Durability³ Up to 500 Mating Cylces
Connector Latching Force 150 N min. with latches engaged
Panel Retention Force 500 N min.
Flammability UL 94 V-0
Materials and Finishes
Insulator
Black Nylon, UL 94 V-0
1 _{Depends on contacts used, layout, and degree of pollution}
2 _{Depends on number and type of contacts used}
3 _{Depends on plating and type of contacts used}
Test Specifications
The table below summarizes the results of key tests. Data is applicable to standard connectors with standard contacts.
Variations may affect this data, so please consult factory for further information on your requirements.
Test
Dielectric Withstanding Voltage
Thermal Shock
Physical Shock
Vibration
Durability 500 cycles of mating and unmating,
500 mating cycles max
Salt Spray
High Temperature Endurance
Humidy Steady State
Moisture Resistance
Method
2000 V ac
-55°C to +125°C (-67°F to +257°F), 5 cycles
50 g’s peak, 3 axes,
11 millisecond duration half-sine pulse
10 g’s peak,
10-500 Hz, 9 hours
No mechanical or
electrical defects
48 hours
and meet contact resistance requirements
1000 hours at 125°C (+257°F)
RH 90-95%, 40°C (+125°F), 504 hours
10 Cycles
Criteria of Acceptance
No breakdown
No physical damage
No physical damage.
No loss of continuity >1 sec
No physical damage,
No loss of continuity >1 sec
Shall be capable of mating and unmating
Insulation Resistance > 100 MW
Insulation Resistance > 100 MW
Insulation Resistance > 100 MW
Dimensions shown in mm (inch)
Specifications and dimensions subject to change
18
www.ittcannon.com