8121SD9ABE223 Datasheet, PDF (7/17 Pages) ITT Industries – Snap-acting Momentary Pushbutton Switches

Y3 6.35mm THREADED, KEYWAY
C&K 8020 Series
Snap-acting Momentary Pushbutton Switches
BUSHING
A
Y4 D2 .378" HIGH THREADED, FLAT
.288" HIGH THREADED, FLAT
D3 .180" HIGH UNTHREADED
D8 .288" HIGH UNTHREADED, FLAT
1/4-40 UNS-2A
Y3 & Y4 bushings not available on single pole models with
A3-A6, R, R2 terminations. Will withstand 12 in./lbs. of torque
with no distortion.
D2, D8 bushings not available with
C, W-W4, Z, Z3 terminations.
NOTE: No bushing option choice required when JXX actuator option is selected. When selecting bushing option, plunger
selection must also be made, see previous page. Plunger lengths vary with bushing and termination options selected.
D3 bushing available with
A, A2, A3, AV, AV2, AV3 and
V2-V61 terminations only.
NOTE: Two mounting nuts, locking ring and lockwasher supplied standard with threaded bushings.
Optional mounting nut and locking ring styles available, see section “Technical Data and Additional Hardware”.
Z SOLDER LUG
TERMINATIONS
C PC THRU-HOLE
PC MOUNTING
SPDT thru 4PDT
Z3 QUICK CONNECT
SPDT thru 4PDT
Not available with J95 actuator,
K, L, P or R contact material.
SPDT thru 4PDT
Not available with J95 actuator option.
W W1, W3, W4 WIRE WRAP
DIM `A'
OPTION
CODE
W
W1
W3
W4
DIM ‘A’
.750 (19,05)
.964 (24,49)
.425 (10,80)
1.062 (26,97)
Not available with J95 actuator, K, L, P or R
contact material. Mating quick connector avail-
able,order part number 530100000, page A-42.
SPDT thru 4PDT
A–33
Not available with J95 actuator option.
Third Angle
Projection
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com