8121SD9ABE223 Datasheet, PDF (10/17 Pages) ITT Industries – Snap-acting Momentary Pushbutton Switches

C&K 8020 Series
Snap-acting Momentary Pushbutton Switches
TERMINATIONS
A
A6 RIGHT ANGLE, PC THRU-HOLE
PC MOUNTING
8121SD9A6GE
SPDT
Not available with JXX actuators, D3, H, H9, Y3, Y4 bushings and I seal.
Terminal bend radii and lead-in manufacturing option.
R RIGHT ANGLE WITH PCB
The A6 and R termination options are functionally identical and fit the same PC mounting pattern,
The switches, however, are shifted relative to the mounting holes. The PC pattern must clear the
switch support legs. Unlike the R, the A6 option is available with UL/CSA.
PC MOUNTING
8121SD9RGE
SPDT
Not available with JXX actuators, D3, H, H9, Y3, Y4 bushings, I seal option.
R termination not UL/CSA approved.
R2 RIGHT ANGLE WITH PCB, REVERSED TERMINALS
PC MOUNTING
8121SD9R2GE
SPDT
Not available with JXX actuators, D3, H, H9, Y3, Y4 bushings, I seal option.
R2 termination not UL/CSA approved.
AV VERTICAL RIGHT ANGLE, PC THRU-HOLE, .100" PITCH
Reversed terminals
PC MOUNTING
8121SD9AVGE
SPDT
A–36
Third Angle
Projection
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com