9201SH3ZQE Datasheet, PDF (5/6 Pages) ITT Industries – Power Toggle Switches

C&K 9000 Series
Power Toggle Switches
TERMINATIONS
AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE
Actuator Shown in Pos. 1
PC MOUNTING
SECTION A-A
Terminal Nos.
For Reference Only
9201SH3AV2QE
Vertical Actuation
DPDT
9201 Only
NOTE: Terminal bend radii and lead-in manufacturing option.
Terminal spacing greater than 3mm at all points.
CONTACT MATERIAL
OPTION
CODE
Q
MODEL
9201
9221
CONTACT MATERIAL
SILVER ^1,2
SILVER CADMIUM OXIDE ^3,4,6
TERMINAL
PLATING
SILVER OR TIN ^2,5
TIN ⁵
POWER
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
RATINGS
6 AMPS @120 V AC OR 28 V DC; 3 AMPS @ 250 V AC.
10 AMPS @125 V AC OR 28 V DC; 5 AMPS @ 250 V AC.
1 _{END CONTACTS: Coin silver, silver plated.}
2 _{CENTER CONTACTS & ALL TERMINALS: Copper alloy, silver plated.}
3 _{END CONTACTS: Silver cadmium oxide.}
4 _{CENTER CONTACTS: Copper alloy, silver plated.}
5 _{Z4 TERMINALS ONLY: Copper alloy, matte-tin plated.}
6 _{Cadmium in electrical switch contacts is exempt from RoHS.}
NOTE: Any models supplied with Q contact material are RoHS compliant. For the latest
information regarding RoHS compliance, please go to: www.ittcannon.com/rohs.
All 9000 Series models meet international dimensional and electrical requirements.
9221 model must be ordered with Z4 terminations and D seal option.
E EPOXY SEAL
SEAL
D NO EPOXY SEAL
G
Not available with 9221 model or Z4 terminations.
Must be ordered with 9221 model and Z4 termination.
G–52
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com