9201SH3ZQE Datasheet, PDF (3/6 Pages) ITT Industries – Power Toggle Switches

C&K 9000 Series
Power Toggle Switches
ACTUATOR
ACTUATOR
K LOCKING LEVER, .650" HIGH, THREADED
K1 LOCKING LEVER, .680" HIGH, THREADED
ACTUATOR FINISH
Locking Positions
1/4-40 UNS-2A
1/4-40 UNS-2A
2 Position Lock
NOTE: To prevent accidental actuation, toggles must be lifted before being
actuated. When released, toggles again lock in place. Bushing option code
not required. Overtightening mounting nut may cause actuator to bind.
OPTION
. ^CODE
NONE
2
ACTUATOR CAP FINISH
NATURAL ALUMINUM–With Nickle Plated Bushing
BLACK ANODIZED ALUMINUM
L40
LEVER HANDLE
WITHOUT CAP
L43
PLASTIC LEVER HANDLE WITH
ANTIROTATION AND CAP, P/N 4812
OPTION
CODE
2
NONE
ACTUATOR CAP COLOR
BLACK
No Actuator Color (L40 option)
Other colors available, consult Customer
Service Center.
No color choice required.
Finish: Matte
NOTE: Lever handle actuator L43 supplied, but not installed. For interchangeability, order L40 actuator option and order lever handles separately, see page G-53.
Antirotation is standard on all actuators, provides ‘anti-push-in’ feature.
BUSHING
BUSHING
BUSHING FINISH
H3 .296" HIGH, THREADED, KEYWAY
H .296" HIGH, THREADED, FLAT
CW SPLASHPROOF, 15/32 BUSHING
1/4-40 UNS-2A
1/4-40 UNS-2A
15/32-32 UNS-2A
G
Will withstand 12 in./lbs. of torque with no distortion.
For T & T1 actuators only.
NOTE: Two mounting nuts, locking ring and lockwasher supplied standard with threaded bushings.
Black hardware is supplied when either black bushings or actuators are specified. Optional mounting
nut and locking ring styles and finishes available, see Section O.
Internal actuator seal standard. External
bushing seal washer available separately,
order from: Multi-Flex Seals, Inc.,
Hackensack, NJ. Part number: MFS-60064.
OPTION
CODE
NONE
2
BUSHING
FINISH
NICKEL
BLACK
G–50
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com