SSMB Datasheet, PDF (1/39 Pages) ITT Industries – RF Coaxial Connectors

RF Coaxial Connectors
Introduction
This range of 50 ohm microminiature radio
frequency connectors is suitable for both military
and commercial equipment operating at
frequencies up to 4 GHz (SSMB) and 12.4 GHz
(SSMC). They provide a choice of Snap-on
(SSMB) or Screw-on (SSMC) and are available for
a wide range of flexible cables.
SSMC connectors are used where a positive
mechanical engagement is required and where
space permits the use of torque wrenches. SSMB
connectors are quick disconnect versions of the
SSMC and are used in applications where limited
space prohibits the use of torque wrenches or
when components or modules must be quickly
changed to keep down time to a minimum.
Mating Interfaces
SSMB (Snap-on)
PLUG
SSMC (Screw-on)
SSMB/SSMC
SSMB/C
JACK
PLUG
JACK
NOTES
1) Inside diameter of female contact to meet VSWR when mated with a 0,36 - 0,38 (.014 - .015) 2) Must meet the force to engage and disengage
mating characteristics and connector durability diameter male contact.
when mated with its mating part.
Dimensions are shown in mm (inch)
Dimensions subject to change 31