IS66WVE4M16EALL Datasheet, PDF (1/32 Pages) Integrated Silicon Solution, Inc – Asynchronous and page mode interface

IS66WVE4M16EALL/BLL/CLL
IS67WVE4M16EALL/BLL/CLL
64Mb Async/Page PSRAM
PRELIMINARY INFORMATION
Overview
The IS66/67WVE4M16EALL/BLL/CLL is an integrated memory device containing 64Mbit Pseudo Static
Random Access Memory using a self-refresh DRAM array organized as 4M words by 16 bits. The device
includes several power saving modes : Partial Array Refresh mode where data is retained in a portion of
the array and Deep Power Down mode. Both these modes reduce standby current drain. The die has
separate power rails, VDDQ and VSSQ for the I/O to be run from a separate power supply from the device
core.
Features
 Asynchronous and page mode interface
 Dual voltage rails for optional performance
 ALL: VDD 1.7V~1.95V, VDDQ 1.7V~1.95V
 BLL: VDD 2.7V~3.6V, VDDQ 2.7V~3.6V
 CLL: VDD 1.7V~1.95V, VDDQ 2.7V~3.6V
 Page mode read access
 Interpage Read access : 55ns, 70ns
 Intrapage Read access : 20ns
 Low Power Consumption
 Asynchronous Operation < 30 mA
 Intrapage Read < 23mA
 Standby < 200 uA (max.)
 Deep power-down (DPD)
 ALL/CLL: < 3µA (Typ)
 BLL: < 10µA (Typ)
 Low Power Feature
 Temperature Controlled Refresh
 Partial Array Refresh
 Deep power-down (DPD) mode
 Operating temperature Range
Industrial: -40°C~85°C
Automotive A1: -40°C~85°C
 Packages:
48-ball TFBGA
Notes:
1. The 48-pin TSOP-I package option is not yet available. Please contact SRAM Marketing at [e-mail]
for additional information.
Copyright © 2014 Integrated Silicon Solution, Inc. All rights reserved. ISSI reserves the right to make changes to this specification and its
products at any time without notice. ISSI assumes no liability arising out of the application or use of any information, products or services
described herein. Customers are advised to obtain the latest version of this device specification before relying on any published information
and before placing orders for products.
Integrated Silicon Solution, Inc. does not recommend the use of any of its products in life support applications where the failure or
malfunction of the product can reasonably be expected to cause failure of the life support system or to significantly affect its safety or
effectiveness. Products are not authorized for use in such applications unless Integrated Silicon Solution, Inc. receives written assurance to
its satisfaction, that:
a.) the risk of injury or damage has been minimized;
b.) the user assume all such risks; and
c.) potential liability of Integrated Silicon Solution, Inc is adequately protected under the circumstances
Rev.0B | November 2014
www.issi.com - [e-mail]
1