SM-BGA-9055 Datasheet, PDF (5/5 Pages) Ironwood Electronics. – Easily removalbe swivel socket lid

Socket base
Socket base orientation mark
compression plate
orientation mark
Compression Plate
When placing BGA device inside the socket, note
orientation of the socket base, compression plate
and device. Pin A1 orientation mark on the device
is in the upper left corner if looking from the top.
Orientation mark on the socket base is in the
upper left corner if looking from the top.
Orientation mark on the compression plate is on
the upper left corner if looking from the top.
device pin A1
Device
Description: User instructions
Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams.
Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance ±10%, all
other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice.
SM-BGA-9055 Drawing
Ironwood Electronics, Inc.
Tele: [phone]
www.ironwoodelectronics.com
Material: N/A
Finish: N/A
Weight: 5.06
STATUS: Released
ENG: E. Smolentseva
FILE: SM-BGA-9055 Dwg
SHEET: 5 OF 5
DRAWN BY: M. Raske
DATE: 12/22/2014
REV. A
SCALE: 4:1