CG-QFN-7009 Datasheet, PDF (4/4 Pages) Ironwood Electronics. – Minimum real estate required

12
14
1
6
15
4
17
16
18
13
5
19
2
3
11
8
9
10
20
7
ITEM
NO.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
DESCRIPTION
Torsion Spring, 180 0.109" OD, Ccw/Rh
Wave spring 4 lbs 0.375" OD 0.15" ln
Dowel Pin, M1.5 X 20mm LG, 18-8 SS
Dowel Pin, M1.5 X 5mm LG, Hardened Steel
2mm diameter Hinge Pin, 20 mm long
Socket Head Cap Screw M2 8mm long
Backing Plate 5 post
Socket Base 12mm snap lid
6mm x 6mm 0.5mm pitch QFN40
PCB QFN40A 0.5mm pitch
Snap ring for 2mm Hinge pin 0.15" OD
Clamshell snap Socket Lid 12mm IC
Clamshell Latch Snap Lid Socket (modified
M2695 latch)
Compression Plate 6x6mm
IC guide 6x6mm IC
Elastomer guide for 6x6mm QFN
17
0.5mm thick, 0.05x 0.05mm pitch, 50mm sqr, Z-
axis conductive angled elastomer
18
Set Screw M3 Size, 3mm Long, 0.5mm Pitch
19
Spacer
20
Insulating washer, 4mm OD.
Material
Steel Music Wire
Plain Carbon Steel
AISI 347 Annealed Stainless Steel (SS)
AISI 347 Annealed Stainless Steel (SS)
Alloy Steel
Stainless Steel (316)
7075-T6 Alumium Alloy
PPS
FR4 High temp
Material <not specified>
7075-T6 Aluminum Alloy/Ultem
PPS/Ultem
7075-T6 Alumium Alloy
Torlon 4203
Ultem 1000
20 Micron dia gold plated brass filaments
arranged symettrically in a silicon rubber
(63.5 degree angle), Thickness: 0.5mm
Stainless Steel (316)
7075-T6 Aluminum Alloy
Kapton Polyimide/Cirlex
16.00 (x4)
4.00 (x4)
4.00
2.00
4.00
90°
Description: Socket Specification
Primary dimension units are millimeters, Secondary dimension units are [inches], Weight is in grams.
Tolerances: Hole diameters ±0.03mm [±0.001"], Pitches (from true position) ±0.025mm [±0.001"], substrate thickness tolerance
±10%, all other tolerances ±0.13mm [±0.005"] unless stated otherwise. Materials and specifications are subject to change without notice.
CG-QFN-7009 Drawing
Ironwood Electronics, Inc.
Tele: [phone]
www.ironwoodelectronics.com
Material: Material <not specified>
Finish:
Weight: 2.01
M2x0.4 threads
STATUS: Released
ENG: V. Panavala
FILE: CG-QFN-7009 Dwg
BACKING PLATE
SHEET: 4 OF 4
DRAWN BY: M. Raske
DATE: 01/02/2015
ISO View
REV. A
SCALE: 2:1